x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

Circuit Break - A MacroFab Podcast

Dive into the electrifying world of electrical engineering with Circuit Break, a MacroFab podcast hosted by Parker Dillmann and Stephen Kraig. This dynamic duo, armed with practical experience and a palpable passion for tech, explores the latest innovations, industry news, and practical challenges in the field. From DIY project hurdles to deep dives with industry experts, Parker and Stephen"s real-world insights provide an engaging learning experience that bridges theory and practice for engineers

technology

All Episodes

54:42

EP#404: The Barcode is 50 with its creator, Paul V....

Circuit Break - A MacroFab Podcast ·

2023/11/14

Parker and Stephen speak with Paul V. McEnroe, an award-winning engineer who developed multiple state-of-the-art technologies during his long career, including more than two decades in leadership roles at IBM. McEnroe is best known for his primary role in developing the Universal Product Code (UPC), the barcode used on every product in supermarkets and the retail industry, and the scanners that read them. In 2023, the barcode celebrates its 50th anniversary but now Paul is setting the

en

51:23

EP#403: Captured Pads

Circuit Break - A MacroFab Podcast ·

2023/11/07

Parker and Stephen check in with the new Circuit Break Discourse community and a Chip of the Week discussion initiated by mobius_striptease, a closer look at the LT3073 3A, Ultra-Low Noise, High PSRR, 45mV Dropout Ultra-Fast Linear Regulator, a discussion about in and out pads ensues, Parker digs into Weldestroyer updates and how he found that a footswitch could not handle sourcing much current, which means my analog solution is out of the question, Parker provides a Box Truk update,

en

54:01

EP#402: Consciously Collecting Concepts

Circuit Break - A MacroFab Podcast ·

2023/10/31

Parker and Stephen discuss Parker’s participation in Extra Life Day: Revenge of the Holiday Special on November 4, 2023, in which he’ll be playing and streaming STAR WARS Jedi: Fallen Order for 24 hours to raise funds for kids at his local Texas Children's Hospital, the related but unusual Star Wars Halloween costume he’ll be donning this year, checking in with the new Circuit Break Discourse community, how member Tom_Look prompted a discussion about how people organize projects, ideas, and

en

77:49

EP#401: Recording Studio Problem Solving with...

Circuit Break - A MacroFab Podcast ·

2023/10/24

Parker and Stephen have a great talk with Greg Norman, a recording engineer, producer, and technician at Steve Albini’s studio, Electrical Audio, in Chicago, who also constructs and repairs various audio devices out of necessity and general interest, under the name, Normaphone. Greg discusses his background and early “pre-Google” experiments and learnings, how to create a low-noise studio space and how your neighbors might unwittingly interfere with such things, why he has had to invent or

en

50:10

MEP EP#400: We Are Circuit Break!

Circuit Break - A MacroFab Podcast ·

2023/10/17

Parker and Stephen celebrate episode 400 of the MacroFab Engineering Podcast and announce its relaunch as Circuit Break starting next week, plus a discussion about MacroFab’s tenth anniversary, the end of our Slack channel and launch of our new Circuit Break Community hub, a brief history of this podcast and its trajectory, key projects that have been completed or else relegated to the shadow realm, plus much more! Relevant links:Celebrating 10 years of MacroFab (twitter)*NEW* Join our

en

60:59

MEP EP#399: Zero to One: Joshua Manley on the...

Circuit Break - A MacroFab Podcast ·

2023/10/13

Parker and Stephen welcome Josh Manley back to the show to discuss how humans and CAD can interact! Josh is the co-owner and CEO of CADClass.org. Through a comprehensive array of courses and literature, CADClass.org provides education of various software and design methodologies, catering to individuals across all proficiency levels. Since 2010, Josh has been utilizing his experience to create educational opportunities for anyone and everyone who wants to learn engineering skills. Here, he

en

49:13

MEP EP#398: Duke Nukem v. Parker, Raspberry Pi 5,...

Circuit Break - A MacroFab Podcast ·

2023/10/06

Parker and Stephen discuss Parker’s past and upcoming Extra Life Day charity work, in which he plays video games like Duke Nukem and STAR WARS Jedi: Fallen Order to support Children’s Miracle Network Hospitals, a rather deep dive into the newly launched Raspberry Pi 5, personal project updates from Stephen about the Weldestroyer 3000, and much more! Relevant links:Extra Life Day: Revenge of the Holiday SpecialMEP EP#105: Community DiceIntroducing : Raspberry Pi 5MEP EP#361: Cold Welding

en

49:06

MEP EP#397: Guard the CHIPS, New Math for Double E’s

Circuit Break - A MacroFab Podcast ·

2023/09/29

Parker and Stephen discuss community feedback that led Parker to order a Bambu X1 Carbon 3D Printer, which should be arriving any day now, S to the L to the A, “guardrails” that the U.S. Commerce Department has placed on the CHIPS for America program, the healthy job market for engineers in America right now, flagging down the double E’s, how to teach engineering students properly, new math, and much more! Relevant links:MEP EP#394: GPUs D.O.A, Reverse Polarity Problems, 3D Printer

en

59:38

MEP EP#396: PoE - Phantom over Ethernet

Circuit Break - A MacroFab Podcast ·

2023/09/22

Parker and Stephen discuss the Cloudlifter mechanism they now use to help enhance the sound of this podcast, what phantom power is and what it actually does, more reverse polarity protections from the community, some of this show’s most audible fans, down with Slack, up with Discourse, an overdue box truck update, and much more. Relevant links:What Does a Cloudlifter Do (And Should You Be Using One)?What is Phantom Power & Why Do I Need It?Ideal Diode Bridge ControllerMEP EP#110:

en

55:50

MEP EP#395:The EU Charges Apple Up, Down with Slack,...

Circuit Break - A MacroFab Podcast ·

2023/09/15

Parker and Stephen discuss power-only USB Type-C connectors entering the marketplace, Apple being forced to convert iPhones to USB-C after the EU established and enforced the Common Charger Directive and what such government legislations might mean for tech innovation, community discussion about reverse polarity protection, how the new Slack GUI is both not good and unnecessary, busy work vs. actual redevelopment, and much more. Relevant links:UJC Power-Only USB Type-C™ ReceptaclesHow to

en

51:53

MEP EP#394: GPUs D.O.A, Reverse Polarity Problems, 3D...

Circuit Break - A MacroFab Podcast ·

2023/09/08

Parker and Stephen discuss some MacroFab updates including news about their pod community and Slack, what’s wrong and right about high-end GPUs and the marvels of KrisFix and his YouTube repair channel, what’s up with consumer electronics and their lack of reverse polarity protection, and Parker muses about when it’s time to call it day for a 3D Printer. More on these topics:Community:New community hub! Shifting away from the Slack channel?Are you in or near Houston, Texas any time soon

en

59:34

MEP EP# 393: Recyclable PCBs, EOL Design, Cold Cuts

Circuit Break - A MacroFab Podcast ·

2023/09/01

Parker and Stephen discuss Infineon’s use of recyclable PCBs from Jiva Materials to create a soluboard, a recyclable and biodegradable PCB substrate, and its ecological and efficiency implications, an examination of the new Arduino Uno, which replaces the ATMEGA328P with two new models, Minima and Wifi, plus a CNC update and an extended meditation on saw blades and what they can and cannot actually cut.More on these topics:Infineon uses recyclable PCBs from Jiva MaterialsThe fibers are

en

71:01

MEP EP# 392: Radioactive Drugs and Robots

Circuit Break - A MacroFab Podcast ·

2023/08/25

Matt has been teaching Robotics and Embedded Systems at the University of Advancing Technology since 2019. Before that, he worked in the pharmaceutical Industry for 15 years, primarily for Cardinal Health where he made radiopharmaceuticals (radioactive drugs) and worked as the Quality Unit in production for seven years, before switching to R&D as a Senior Principal Scientist. Guests:Matthew Prater from the University of Advancing TechnologyIncreasing the dosageMatt on how he began

en

47:56

MEP EP# 391: DFS: Design for Snackey

Circuit Break - A MacroFab Podcast ·

2023/08/18

This special episode is recorded at DEF CON, the annual hacker community gathering in Las Vegas. Hyr0n and Zapp from AND!XOR dive into the troubleshooting and triumphs of the Snackey vending machine project. From battling long queues to AI-enhanced innovation and mind-boggling challenges, explore the technical and creative journey behind this badge that will ignite your taste buds! Guests:Hyr0n & Zapp from AND!XOR Troubleshooting Snackey at DEF CON Snackey was a hit! The vending

en

39:57

MEP EP# 390: Kathy Joseph and The Lightning Tamers

Circuit Break - A MacroFab Podcast ·

2023/08/11

Join physicist and electrical engineering historian, Kathy Joseph, as she unravels captivating human stories behind electricity's evolution. Discover quirky experiments and eccentric scientists like self-deprecating Heinrich Hertz and self-proclaimed wizard Matthias Bose. Learn how historical knowledge and storytelling inspire present and future engineers.Guests:Kathy Joseph, Physicist and Electrical Engineering Historical Expert Introduction to Kathy and Her Passion for the History of

en

54:20

MEP EP#389: The aCADemy of Education - Joshua Manley...

Circuit Break - A MacroFab Podcast ·

2023/08/04

This week we’re joined by Josh Manley, Co-Owner and CEO of CADClass.org. Through a comprehensive array of courses and literature, CADClass.org provides education of various software and design methodologies, catering to individuals across all proficiency levels. Since 2010 Josh has been utilizing his experience to create educational opportunities for anyone and everyone who wants to learn engineering skills. Guests:Josh Manley from CADclass.orgOvercoming CAD misconceptions3D printing has

en

61:22

MEP EP#388: CHIPS Can’t Dip

Circuit Break - A MacroFab Podcast ·

2023/07/28

This week we’re joined by David Schild, the Executive Director of the Printed Circuit Board Association of America (PCBAA). PCBAA is a consortium of American companies supporting domestic production of printed circuit boards and the materials they are made of. An established leader and trusted advocate, Schild has over 20 years of experience managing political involvement, corporate public relations and public policy efforts for the aerospace and defense industry and advocates for the CHIPS

en

53:54

MEP EP#387: Recursive Vending Machines

Circuit Break - A MacroFab Podcast ·

2023/07/21

Join us as we chat with Hyr0n and Zapp from AND!XOR Group about their iconic badges for DEF CON 31. Learn about the challenges and creative process behind their badges, including the returning Snackey Vending Machine. Discover how AI enhances their workflow while uncovering its limitations. Get ready for a captivating conversation!Text:Guests:Hyr0n & Zapp from AND!XOR Intro to AND!XOR and Previous Badge Designs for DEF CONA brief history of AND!XOR group The origins of Hyr0n &

en

55:46

MEP EP#386: When Will AI Replace Podcast Hosts?

Circuit Break - A MacroFab Podcast ·

2023/07/14

Delve into the world of AI in chip design, exploring the limitations and benefits of AI, its impact on productivity and the labor market, and the future of this technology. We also join Parker on another exciting installment of his Box Truck project as he converts a truck into an RV. We discuss the limitations of warranties and power systems for conversions. Tune in for a captivating conversation!Text:AI Can't Design Chips Without People 🤖Advancements and challenges in AI's role in chip

en

45:54

MEP EP#385: Mislabeled levels of Hell

Circuit Break - A MacroFab Podcast ·

2023/07/10

In the spirit of summer, we kick off this week with a timely discussion of whether you can cook food on the engine of your car; how hot would your exhaust pipes even need to be? Stephen shares the current challenges he’s facing with his CNC (computer numerical control) project; avoiding messy wiring, dos and don’ts of using electrical tape and when to upgrade to a bigger 3D printing. We also discuss the special place in Hell for the person at the hardware store who puts the wrong screw in

en

448 results

Similar Podcasts

Pantomath

PANTOMATH

What"s New

WIRED

Security, Spoken

WIRED

Ben Wehrman Podcast

Ben Wehrman

MacMagazine no Ar

MacMagazine.com.br