x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

The D-Code Podcast

Decoding electronics manufacturing! Sean Kincaid, Elias Malfavon, and Daniel Stanphill along with an expert guest, talk all things PCBA.

technology

All Episodes

16:56

APEX EXPO 2026 Dan Ashley - PVA

The D-Code Podcast ·

2026/04/08

We had a great chat with Dan Ashley from PVA. The more we learned about the offerings from PVA the 3 letters it made us think about most was ROI.They have dispensing capabilities for any SMT application you might run into- conformal coatings, 2 part epoxies, underfill, glue, masking, etc. They even have a UV curing system available within the same form factor. Would be easy to keep rambling on about everything they offer but really you should just check the interview out for yourself! Thank

en

22:21

APEX EXPO 2026 Bob Bouchard - BTU

The D-Code Podcast ·

2026/04/07

What do you know about reflow soldering?Likely not as much as Robert Bouchard from BTU International! Bob showed us their Aurora oven (great name) and described how it overcomes the thermal challenges associated with today's boards. Most of the boards I run have 1-2oz copper pours. I can't even imagine the difficulty in getting good reflow on boards that weigh upwards of 20 lbs! We really cover a lot of ground in this interview. Bob breaks down the science behind the reflow oven and you don't

en

15:17

APEX Expo 2026 David Ly - Inovaxe

The D-Code Podcast ·

2026/04/07

Our APEX 2026 series continues on with David Ly from Inovaxe Corporation. We had fun checking out the new InoHD Storage system in the Inovaxe booth, and chatting about some of the smart storage systems offerings.

en

14:00

APEX EXPO 2026 Oren Manor - Siemens EDA

The D-Code Podcast ·

2026/04/02

Not all testing is created equal, and gaps in your testing can hurt more than you realize. This is why it is important to design for testing and to especially be intentional in how you prioritize testing and inspection methods along the way. Oren Manor of ‪@SiemensSoftware‬ EDA joins The D-Code to discuss a recent acquisition of a premier testing planning and execution system.

en

34:29

APEX Expo 2026 Dr. John W Mitchell

The D-Code Podcast ·

2026/03/26

Daniel put it best - "I told you he'd remember us." We have known we are great friends with Dr. John W Mitchell for some time now, but we now have definitive proof in case we ever sit by say, Henry Winkler, on a flight. We have loved working with ‪@GlobalElectronicsAssociation‬ at every opportunity we've had, and #apexexpo 2026 was no exception. We hate clickbait titles, so we've buried them in the description. WANT SECRET TIPS TO GET THE BEST BOOTH LOCATION? WHAT ABOUT NOT-SO-SECRET FUNDS FOR

en

48:40

Rev 3.3 Chrys Shea

The D-Code Podcast ·

2026/03/10

One of our favorite people, Chrys Shea, joins us again for more laughs, more process engineering, and more nerding out. From designing tougher and tougher SMTA test boards to teaching concepts with grilled cheese sandwich and silly putty, Chrys keeps us entertained the whole conversation, and she'll get you chuckling, too.

en

65:24

Rev 3.2 Mike Konrad

The D-Code Podcast ·

2026/02/24

Welcome back Mike Konrad! Aside from being a great person, Mike has mentored us through podcasting, media production on site at trade shows, loaned us equipment and in general, been a great mentor in business and life as well for all of us, including Producer Paul. Thanks for joining us again, ESPECIALLY spending some of your time in Hawaii at PanPac to hang out with us.

en

41:01

Rev 3.1 Dr. John Mitchell

The D-Code Podcast ·

2026/02/17

You've waited for it, you've begged for it, and the wait is finally over. Rev 3! The D-Code thanks you coming back to us for another season. The first time we "talked" about having the iconic Dr. John W. Mitchell on the podcast, it was a joking matter and we thought "as if that will ever happen". Now, without further preamble, enjoy. Dr. John on The D-Code Podcast.

en

7:25

Rev 3 Season Opener

The D-Code Podcast ·

2026/02/10

The D-Code Crew is back for a third season! Catch this quick intro into season 3, including a look back at 2025.WE'RE BACK!!!!!!

en

37:41

Rev 2.33 Timon from Luminovo

The D-Code Podcast ·

2025/12/23

Join us as we speak with Timon Ruban on starting and scaling a tech startup where humans are the highest cost by far. Err, make that investment, because Timon recognizes that true leadership requires training your employees not just on the job, but training them to speak up and be confident in representing ideas and values. Now that Luminovo has enjoyed success in Europe, they are expanding to North America, and Timon has been spending his time in New York hiring a new team for expansion! New jobs,

en

37:56

Rev 2.32 Solder paste with Shantanu and Greg from KOKI

The D-Code Podcast ·

2025/12/09

Rev 2.32 - Sean Vouches For KOKI with Shantanu Joshi & Greg StarrettNot all endorsements are created equal. Some come from sources like Sean Kincaid, who will proudly explain he's not a customer before going on to describe excellent service he received without pursuing next steps (cough cough Metal Etch Services cough). You don't have to take Sean's word for it! Watch yourself to hear Shantanu Joshi and Greg Starrett demonstrate their extensive knowledge about solder paste advancements, formic

en

61:23

Rev 2.31 - Bob Willis

The D-Code Podcast ·

2025/11/25

Some people are just wired to share knowledge, and if you've ever encountered Bob Willis on LinkedIn, YouTube, or in person, you likely learned something valuable. Bob is someone who recognizes the value of getting in and playing with something to learn it, whether it is in your job description or not. Get over there, manipulate it, and understand it!Aside from picking his brain about training, lead-free solder testing, causes and mitigation of tombstoning... well, watch for yourself! See chapters

en

26:09

Rev 2.30 - Mike from Aqueous @SMTAI

The D-Code Podcast ·

2025/11/14

THE FINAL BOSS - Mike Konrad, Author, Podcaster, Narrator, Business Owner, SMTA Talking Head...Final as in, last SMTA International 2025 Interview, folks! Thank you for tuning in to each one along the way. 😀 Mike Konrad has been one of our largest supporters and we are not exaggerating when we say that we are only here because of him. We are here because of many reasons, but one will always be Mike. From guiding us through the initial decision to even start a podcast to loaning us the entire

en

13:03

Rev 2.29 - John from Zestron @SMTAI

The D-Code Podcast ·

2025/11/14

If you've ever heard of Zestron, then you know they are pretty serious about cleaning. But among the more technical discussion you'll find here, John Neiderman also shares that Zestron has as highly decorated Reliability & Solutions (R&S) Team that consults on projects, including root cause and failure analyses. By analyzing the full process, including printing, placement, profiling and more, they often uncover process improvements to benefit you that have nothing to do with changing or

en

16:33

Rev 2.28 - Brent from Johnson SMT @SMTAI

The D-Code Podcast ·

2025/11/13

When running a PCBA Consulting agency, you run into everything. Or so Brent Johnson imagines. He may have just recently started his agency, but he has years of process engineering experience, and has already worked with a popular guest on the podcast, Jordan Danko! Let the roasting begin... No, this was a great conversation, and it just felt like the right time to bring back "a lack of board supports on the second side" from one of the hosts you see here... He was asking for it though, because he

en

17:27

Rev 2.27 - Viktoria Rawinsky @SMTAI

The D-Code Podcast ·

2025/11/13

Viktoria Rawinsky Solves (PCB) Crime For a Living! How fun does that sound, really? Viktoria gets to spend her time studying, imaging, and finding the root cause of various failure types, often in combination. It takes serious detective chops to not just find one culprit involved in a defective board, but to find and overlay all the "fingerprints" when multiple causes of failure work together to obfuscate the issue. When COVID hit and many were scrambling or holding on tight with fear, Viktoria

en

19:39

Rev 2.26 - Justin from ROCKA @SMTAI

The D-Code Podcast ·

2025/11/12

Justin has a lot of media experience, and is used to having the camera and mic with him, asking questions of others and giving them a chance to shine. We were therefore stoked to have a conversation that was equal parts Personal Marketing, SMTA Involvement, but also really interesting technical conversation as he got into discussing ROCKA not just as a company, but as a leader in modern stencil roll development. Speaking of marketing, we are going to need to get some kind of credit for helping

en

14:31

Rev 2.25 - Sutharshan from SMT Elite @SMTAI

The D-Code Podcast ·

2025/11/12

We knew Sutharshan just got elected to the SMTA Board of Directors (Congratulations!), but we didn't know his full background with the SMTA. It's been 18 Years since the first time Sutharshan expressed interest in learning more about the SMTA! Safe to say he has made the most of his time participating in various ways in that time. SMT Elite is a newer venture for Sutharshan, but with experience in process engineering, DFM reviews, constant knowledge absorption via regularly scheduled webinars and

en

25:55

Rev 2.24 - Rob Bugoski from Datest @SMTAI

The D-Code Podcast ·

2025/11/12

This is an excellent blend of technical conversation and personal experiences of the connections formed in this community, especially via SMTA activity. Robert Boguski is entertaining and humorous while discussing his company's background and role, and there are plenty of laughs in the first half while generally keeping to industry topics. But for those of you who like to learn more about: the personal lives of our hosts and guests... the experiences behind the scenes and outside of primary

en

17:34

Rev 2.23 - Gary from ABW @SMTAI

The D-Code Podcast ·

2025/11/11

Gary Bales, President and CEO of Aurora Boardworks, stops by the set to discuss Daniel's employee personnel file! We kid, but we did have a great conversation about ABW's storied history, and their recent investments in new automation and production capabilities. Thank you to Gary and ABW for their continued support of The D-Code Podcast!

en

95 results

Similar Podcasts

Lead With AI

Tamara Nall

Linux in the Ham Shack

Black Sparrow Media

Data Engineering Podcast

Tobias Macey

Eye On A.I.

Craig S. Smith

Reflections

Livewire Labs