x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

Clear To Send: Wireless Network Engineering

Rowell Dionicio and François Vergès

Clear To Send is a podcast about wireless engineering where we educate you on WiFi technology, talk about design tips, troubleshooting, interviews, and the tools.

news tech news

All Episodes

39:07

CTS 258: This Week In Wireless – 802.11-2020

Clear To Send: Wireless Network Engineering ·

2021/03/09

New IEEE-802.11 Standard The IEEE published, on February 26th, a new version of the IEEE 802.11 standards. It is called IEEE-802.11-2020. Did you get your copy yet? But take note: 802.11ax didn’t make it to this version – womp womp. You can buy it here if you cannot wait: https://standards.ieee.org/standard/802_11-2020.html Here is the timeline of […] The post CTS 258: This Week In Wireless – 802.11-2020 appeared first on Clear To Send.

en-US

40:56

CTS 257: When Should You Do APoS?

Clear To Send: Wireless Network Engineering ·

2021/02/22

In this episode, Rowell and I talk about some of the reasons why we do some AP-on-a-Stick site surveys. Both of us share some of the APoS work we have been doing in different environments. We get into some of the equipment we used to make our measurements. And we also talk about what we […] The post CTS 257: When Should You Do APoS? appeared first on Clear To Send.

en-US

56:33

CTS256: IoT with Troy Martin

Clear To Send: Wireless Network Engineering ·

2021/02/08

This week, we have Troy Martin on the show to talk about IoT. We talk about the IoT landscape and which wireless technologies are used both at home and in the enterprise space. Troy Martin, CWNE #90 and CWNE Advisory Board Member, works as a Principal Consultant for Trogen Consulting. He also co-host a podcast […] The post CTS256: IoT with Troy Martin appeared first on Clear To Send.

en-US

1:06:14

CTS255: Our Warehouse Wi-Fi Design Walkthrough

Clear To Send: Wireless Network Engineering ·

2021/02/01

Following episode CTS 252 where we talk about our general Wi-Fi Design methodologies, we wanted to do a deep dive on warehouse Wi-Fi. Enjoy the episode: We covered a few things that are even more relevant in a warehouse / manufacturing environment: Installation heights Choosing the right antenna Choosing the proper installation type Choosing the […] The post CTS255: Our Warehouse Wi-Fi Design Walkthrough appeared first on Clear To Send.

en-US

1:00:00

CTS 254: How Wiflex uses APIs for their Services

Clear To Send: Wireless Network Engineering ·

2021/01/25

We’ve had many discussions about using APIs with Wi-Fi. Mostly it’s been around learning Python, practicing with simple projects, or using scripts to enhance our work with clients. Today, we bring on Jonas Dekkers from Wiflex. Wiflex is an cloud-based service to help organizations onboard their customers and end users onto the Wi-Fi network. Jonas […] The post CTS 254: How Wiflex uses APIs for their Services appeared first on Clear To Send.

en-US

54:52

CTS 253: Mist AI JNCIA Certification with John Breth

Clear To Send: Wireless Network Engineering ·

2021/01/18

In this episode, we are welcoming John Breth to talk about the Mist AI JNCIA certification. John Breth work as an IT/Cyber Architect. His focus is security but he decided to go for all Juniper JNCIA certifications last year, which led him to try out the JNCIA Mist AI certification. It was nice to hear […] The post CTS 253: Mist AI JNCIA Certification with John Breth appeared first on Clear To Send.

en-US

1:15:18

CTS 252: Our Wi-Fi Design Walkthrough

Clear To Send: Wireless Network Engineering ·

2021/01/11

We’re providing a view of how we use Ekahau Pro to perform predictive modeling of an office floor plan. In a future episode, we will do a walkthrough of a warehouse predictive model. François and I perform Wi-Fi design differently. This episode we talk about our differences, the goals we’re trying to achieve, and an […] The post CTS 252: Our Wi-Fi Design Walkthrough appeared first on Clear To Send.

en-US

22:27

CTS 251 – Fast BSS Transition Frame Exchanges (CWAP)

Clear To Send: Wireless Network Engineering ·

2021/01/04

In this episode, we’re going to cover a small topic of the CWAP certification. We’re taking a look at the frame exchanges that occur during 802.11r or Fast BSS Transition. In our scenario we’ll use my iPhone which associates to AP1 and roams to AP2. Without 802.11r, the roam will take additional time to complete. […] The post CTS 251 – Fast BSS Transition Frame Exchanges (CWAP) appeared first on Clear To Send.

en-US

57:10

CTS 250: 2020 Year in Review

Clear To Send: Wireless Network Engineering ·

2020/12/28

After 47 episodes we’re closing the book in another year of podcasting. We missed 5 episodes which is not bad for publishing every week. We run this podcast in addition to our careers and while being with our families. We’ve certainly enjoyed the process along the way and have learned a lot. There was plenty […] The post CTS 250: 2020 Year in Review appeared first on Clear To Send.

en-US

39:41

CTS 249: RF Behaviours

Clear To Send: Wireless Network Engineering ·

2020/12/21

In this episode, we talk about the different behaviours that an RF signal can have while travelling through different environments. This will help you better understand what happens to Wi-Fi signals as they travel away from their transmitters. This is a very nice episode if you are studying for your CWNA or if you are […] The post CTS 249: RF Behaviours appeared first on Clear To Send.

en-US

54:20

CTS 248: Deploy FreeRADIUS on your WLAN Pi

Clear To Send: Wireless Network Engineering ·

2020/12/14

This week, we are showcasing how you can deploy freeradius on your WLAN Pi. This is, yet, another way to take advantage of your WLAN Pi to do your work as a Wi-Fi Engineer. Why would you want to deploy freeradius on a WLAN Pi? Here are a few reasons why: Start a quick radius […] The post CTS 248: Deploy FreeRADIUS on your WLAN Pi appeared first on Clear To Send.

en-US

59:33

CTS 247: The Best Wi-Fi Apps for MacOS

Clear To Send: Wireless Network Engineering ·

2020/12/07

We have the author of the best Wi-Fi apps for MacOS, Adrian Granados, joining us on this episode. Adrian went full-time with his company, Intuitibits, to dedicate more time to his applications so we can be better working with Wi-Fi. We last had Adrian on the show on Episode 7! He describes what it was […] The post CTS 247: The Best Wi-Fi Apps for MacOS appeared first on Clear To Send.

en-US

55:16

CTS 246: Wi-Fi Coffee Hour – Unboxing, Quadrants,...

Clear To Send: Wireless Network Engineering ·

2020/11/30

This episode comes from our live stream of Wi-Fi Coffee Hour where we discuss industry news. Watch the video version below. And be sure to follow us on YouTube! I’ve had a brand new access point sitting in a box for a while now, why don’t we unbox it. And what are the differences between […] The post CTS 246: Wi-Fi Coffee Hour – Unboxing, Quadrants, UNII4, and more appeared first on Clear To Send.

en-US

1:05:31

CTS 245: Celona Edge Architecture and Live Demo

Clear To Send: Wireless Network Engineering ·

2020/11/18

Celona joins the podcast to show us the platform capabilities of Celona Edge and enterprise integration. We also take a look of a live demo running on San Jose State University. Take a look at how CBRS can be used in a private network environment. For a visual look at the solution, check out the […] The post CTS 245: Celona Edge Architecture and Live Demo appeared first on Clear To Send.

en-US

54:33

CTS 244: Handheld Wi-Fi Tools with netAlly

Clear To Send: Wireless Network Engineering ·

2020/11/09

Which tools are best to use for Wi-Fi troubleshooting? Maybe you’re using a handful of tools to complete the job. Each tool performs a specific function and in the end we need to merge the data collected into a single report or next action. For a few months, I’ve been testing the netAlly EtherScope nXG. […] The post CTS 244: Handheld Wi-Fi Tools with netAlly appeared first on Clear To Send.

en-US

45:01

CTS 243: 802.11 Power Saving

Clear To Send: Wireless Network Engineering ·

2020/11/02

Power saving is a normal function of mobile devices. It’s required to conserve battery. In this episode, we summarize what we’ve read about Power Management from the 802.11 standard. Power save (PS) is a power management mode in which a station (STA) alternates between two states: Awake: STA is fully powered Dozing: STA is not […] The post CTS 243: 802.11 Power Saving appeared first on Clear To Send.

en-US

16:58

CTS 242: Dynamic Bandwidth Operation

Clear To Send: Wireless Network Engineering ·

2020/10/26

Dynamic bandwidth operation occurs when a transmitter attempts to acquire the medium for a bonded channel but is only cleared to use a smaller channel width. For example, let’s consider an access point configured to serve devices with a 40 MHz channel width. A device would transmit an RTS for 40 MHz but the receiver […] The post CTS 242: Dynamic Bandwidth Operation appeared first on Clear To Send.

en-US

40:22

CTS 241: Cisco Meraki Solutions Specialist Certification

Clear To Send: Wireless Network Engineering ·

2020/10/12

Meraki has been around for a long time. With over 508k customers, 2.5 million active networks, and in 190 countries, it’s about time there’s a certification around Meraki technologies. The Meraki-specific certification is the Cisco Meraki Solutions Specialist Certification. The exam is called Engineering Cisco Meraki Solutions, exam number 500-220 ECMS. Meraki’s ECMS certification covers […] The post CTS 241: Cisco Meraki Solutions Specialist Certification appeared first on Clear To Send.

en-US

CTS240: New Mist Training & Certifications

Clear To Send: Wireless Network Engineering ·

2020/10/05

Juniper is coming out with a new certification track for Mist under the Juniper certification portfolio. This track will be focused on Wi-Fi as well as anything Mist related. JNCIS-MistAI is the first official certification. Became available on September 28th 2020. JNCIA-MistAI will be coming before the end of the year. The new Juniper Mist […] The post CTS240: New Mist Training & Certifications appeared first on Clear To Send.

en-US

49:22

CTS 239: Google’s Orion WiFi

Clear To Send: Wireless Network Engineering ·

2020/09/28

Inside of Google’s in-house incubator, Area 120, is the birth of Orion WiFi. A new way for network operators to offer their Wi-Fi to carriers and generate revenue. In this episode, we have two guests from Google: Raj Gajwani Rich Mazzola Orion WiFi lets businesses such as public venues sell their Wi-Fi capacity to cellular […] The post CTS 239: Google’s Orion WiFi appeared first on Clear To Send.

en-US

331 results

Similar Podcasts

Expres Ráno

Expres FM

PBS News Hour - Full Show

PBS News

CD Voice

China Daily

Israel Today: Ongoing War Report

Noa Levi

Jeffrey Epstein: The Coverup Chronicles

Bobby Capucci