x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

WTFFF?! 3D Printing Podcast Volume Three: 3D Print Tips | 3D Print Tools | 3D Start Point

Tom Hazzard & Tracy Hazzard

This is the Third 200 episodes of the WTFFF?! 3D-Printing Podcast. WTFFF?! Co-hosts Tom & Tracy Hazzard focus on the what of Fused Filament Fabrication (3D Printing), what design software to use, what printer to buy, what tools to use, what designs should you print, what new materials are out and what your business strategy should be. On the 3D Printing Podcast, they interview the who is who in 3D Print art and design along with others who can help you figure out your what. They share with you

news tech news

All Episodes

56:41

3D Printed Shoes by Feetz, with Lucy Beard

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/26

We had the opportunity to hear Lucy speak in San Diego at the Inside 3D Printing conference last December. We were really impressed with her. We went up to her after her talk and asked her to be a guest on the show, and was more than happy to do it. Lucy was requested by Eduardo Martini via Facebook, he saw the online promo video for their shoes and suggested her as a guest. We’ve been looking for female CEOs in the 3D printing world, and she certainly is one. What we really loved about her, which

en-us

20:33

4 CEOs in 4 Years for MakerBot

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/25

In current news for the 3D printing industry, MakerBot now has a new CEO. That’s 4 CEOs in 4 years. Tom and Tracy Hazzard discuss their thoughts on what caused this and what it means for the company moving forward. They share their opinion on what went wrong and what needs to change for MakerBot. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on

en-us

28:17

Cura Slicing Software Review

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/24

Cura is a free slicing software that is created by Ultimaker. Cura has a lot of features, and these are definitely for the advanced user. If you’re serious about doing your own slicing and want to do advanced things that go beyond predefined basic slicing settings, then the Cura slicing software is definitely a good slicer to try out. Tom provides you a thorough guided tour of Cura’s features, and what sets it apart from other slicers. To send us a message, go to 3dstartpoint.com or shoot us a

en-us

32:19

Mixed Emotions (or Emojis) with Austin Robey of Make...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/23

Real world 3D print design sales numbers are hard to come by, and we are glad that Austin Robey of Make Mode has generously offered to share his Shapeways shop stats for his line of 3D printed emoticons or emojis. Through our discussion there are many take-aways to gain about what to design, how to market your products, types of consumers are in the different 3D print “store fronts”, and even what platform is already set up for sales success and how others are lacking. To send us a message, go to

en-us

17:53

Trimble SketchUp CAD Software Review

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/20

Trimble SketchUp is a free CAD design program that should not be passed up for new 3D print creators and those collaborating with a team to create 3D models. Looking at who should consider making the jump from the free version to the Pro version and what sorts of designers might want to take a second look at the many different features it has to offer. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away

en-us

46:57

3D Printing Toys with Mark Trageser of InsaniTOY

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/19

Our guest, Mark Trageser, has been embracing and taking advantage of what 3D printing affords designers in the realm of 3D printing toys. His strong opinions on the 3D print industry and different companies with in it are a breath of fresh air. With his impressive background in design, working with Fisher-Price and Mattel, he has extensive experience in manufacturing toys and shares key consideration points on the complexities of bringing these products to the shelf. To send us a message, go to

en-us

21:52

Robo3D Updates

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/18

We got quite a few Robo3D updates after touching base with Braydon Moreno at this years CES. Robo 3D unveiled many new features to their 3D printer platform to include quite a handful of helpfuls apps that integrate with their 3D printer system in a way that many other companies just do not have. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on

en-us

20:27

Robo3D Updates

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/18

We got quite a few Robo3D updates after touching base with Braydon Moreno at this years CES. Robo 3D unveiled many new features to their 3D printer platform to include quite a handful of helpfuls apps that integrate with their 3D printer system in a way that many other companies just do not have. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on

en-us

52:53

CES 2017 Event Review

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/17

In comparison to last year’s this CES 2017 event review features far fewer 3D printing companies, but attending the show this year revealed how the desktop 3D print industry has matured. We are covering it all today from 3D scanners, software, new 3D printers, service bureaus, and even some new design possibilities. For those of you that did not have the opportunity to attend the show, we have you covered. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or

en-us

12:43

How to Improve 3D Prints – Tips and Suggestions

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/16

Answering a listener question about how to improve 3D prints and outlining a plan of attack to diagnose why the print didn’t come off the build plate beautifully in the first place. With so many variables to consider like print speed, infill, filament, surface smoothness, the CAD design itself, and many other options in the slicing software, it is difficult to narrow down how to improve 3D prints if you don’t know where it went wrong. Tom and Tracy Hazzard offer up a few of their best suggestions

en-us

12:44

Buzzed Beer 3D Print Filament

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/13

3D printers have long advocated how 3D printing is a zero to low waste manufacturing process, and with the development of Buzzed Beer 3D print filament, it has opened the doors to all sorts of recycled filament opportunities. By repurposing the by -products made from the production of beer, this boozy filament makes it fun to “go green” with 3D printing and the perfect example of collaborative capitalism. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or

en-us

34:16

3D Print STEAM Challenges with Todd VanHoogstrate of...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/12

New 3D print technology plays on familiar classic STEAM projects in the classrooms at Rippl3D. Capturing excitement in STEM and STEAM at an early age is critical to educational development and 3D printing is another tool educators can use to drive student engagement. Rippl3D has a database full of 3D print STEAM projects, as well as a long list of 3D print STEAM challenges that come along with taking on this type of endeavor to reach out to students during the short window of opportunity and

en-us

9:21

3D Printed Weapons – Russian 3D Printed Bullets

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/11

With the emergence of a 3D printed gun, it comes as no suprise that testing has been done on the creation and use of 3D printed bullets. Tom and Tracy Hazzard question what this means and could mean for warfare, safety issues, and users that choose to print these items at home? To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly

en-us

25:36

3D Print Patents for 2017

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/10

Taking a look at recent 3D print patents for 2017 that have emerged, what the technology means for the 3DP market, and how they may or may not be successful in achieving their goals. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!

en-us

25:25

M3D Printer Review – Battle of the Mini 3D Printers

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/09

Funded through a successful Kickstarter campaign, the M3D printer was ready for order fulfilment as of last year’s CES show. While the package and product design was well done, many of the 3D printing capabilites of this particular printer model were lacking. Despite a number of failed test prints, the M3D team did have one thing going for them that so many other 3D printer companies and manufactuers simply do not address; customer service. To send us a message, go to 3dstartpoint.com or shoot us a

en-us

11:34

Critical Thinking is Taught Through Arts, not Science

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/06

Putting 3D printers in schools is taking steps forward to bring the arts back to schools in a new found way by combining technology with creativity and generating new ways for students to learn basic curriculum components such as math, history, and geography. Tom and Tracy advocate why the “A” should be added to traditional STEM programs and curriculum to develop critial thinking as it relates to 3D print design. To send us a message, go to 3dstartpoint.com or shoot us a message at

en-us

38:45

3D Print Business Evaluation with Dr. Mike Vasquez of...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/05

Looking at if it’s feasible for a company to get a solid 3D print business evaluation from in-house sources with Dr. Mike Vasquez of 3Degrees. Businesses large and small should all consider getting a 3D print business evaluation to see if additive manufacturing is a viable option for their products and processes, but the trick is knowing how to find a knowledgeable source from the technology and product side. It’s past time to start exploring the capabilities of 3D printing for your business, and a

en-us

26:47

3D Printed Games and Toys

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/04

Looking at the issue of designing well thought-out 3D printed games and toys and why the market is full of repeats and reinventions. While some use the file depository sites to post the first and second drafts of their 3D printed games and toys to gain valuable design feedback, others misuse them and put up for sale or submission to contests. Identifying the differences between sculpture and design and how it applies to toys and games as functional or artistic pieces as well as the need for a design

en-us

38:26

3D Print Market Saturation

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/03

As we enter 2017 Tom & Tracy take a deeper dive into the questions of if the desktop 3D print market is already, or becoming saturated? What does market saturation really mean anyway? What has it looked like in other industries? To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook ! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!

en-us

15:03

Going Green with 3D Printing

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/01/02

3D printing makes it easy to go green in a number of ways, primarily in product creation. Tom and Tracy Hazzard look at how their past designed products could have been made with far less plastic in a more Earth friendly manner and showing how much plastic is wasted in traditional manufacturing methods. Even the United States Postal Service has a plan for 3D printing reducing their carbon footprint. Combined with more localized manufacturing, it’s easy to go green with 3D printing. To send us a

en-us

140 results

Similar Podcasts

Expres Ráno

Expres FM

PBS News Hour - Full Show

PBS News

CD Voice

China Daily

Israel Today: Ongoing War Report

Noa Levi

Jeffrey Epstein: The Coverup Chronicles

Bobby Capucci