x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

3DPOD: Insight from 3D Printing Pros

Hosted by Joris Peels (3DPrint.com, Executive Editor) and Maxwell Bogue (3Doodler, Co-Founder & Investor), 3DPOD brings 3D printing & additive manufacturing news and insight, with straight talk from two bona fide 3D printing pros.

news tech news

All Episodes

31:27

3DPOD Episode 120: Increasing the Adoption of 3D...

3DPOD: Insight from 3D Printing Pros ·

2022/09/19

Kris Binon is at the helm of Flam3D, an organization that began by connecting the Belgian region of Flanders via 3D printing. Later, Flam3D grew to represent research institutes and companies throughout Belgium and, now, the Netherlands. In this episode of the 3DPOD, we talk about how to educate people about 3D printing, as well as how to work with governments and other stakeholders to spread 3D printing around the world.

en-US

38:13

3DPOD Episode 119: HD SLS 3D Printing with Charles...

3DPOD: Insight from 3D Printing Pros ·

2022/09/05

Charles Bibas worked in the barcode industry for many years, until he discovered a method that could revolutionize 3D printing. With a small team, he created a better optics package for 3D printing. Rather than going for a salvo, Charles's company Tecnica uses a Lens Free Optical Scanner (LFOS or Ogon) to obtain better results for selective laser sintering (SLS). A labor of love for Charles, Tecnica still had a go-to-market strategy. We talk to him about his plans to take this product to market.

en-US

40:32

3DPOD Episode 118: Intelligent Large Format 3D...

3DPOD: Insight from 3D Printing Pros ·

2022/08/29

When Daghan Cam founded AI Build, the firm's technology was a made up of a single 3D printer attached to a robotic arm for large scale polymer parts. The team did an about face and now focuses on developing the software that controls robotic arm 3D printers, including polymer, composites, concrete and metal. Makers of wire arc additive manufacturing, extrusion, and construction systems are all talking to AI Build now to create their software. With a recent injection of $3.2 million in funding, AI

en-US

40:11

3DPOD Episode 117: 3D Printing Software, DfAM, and...

3DPOD: Insight from 3D Printing Pros ·

2022/08/26

Duann Scott is an industrial-designer-turned-business-development specialist who has worked for such illustrious firms as Shapeways, Autodesk, and nTopology. In our interview with him, he talks fluidly about his vision for the 3D printing software market and what is impeding additive manufacturing (AM) from moving forward. Duann is a firm believer in design for additive, working as an educator of these skills and assisting startups through his Bits to Atoms consultancy. Come hear what he has to say

en-US

43:25

3DPOD Episode 116: Resin 3D Printing with polySpectra...

3DPOD: Insight from 3D Printing Pros ·

2022/08/23

Raymond Weitekamp's research at the California Institute of Technology was the basis for a new way to 3D print resin. Now, Weitekamp's trying to commercialize the technology via a startup called polySpectra. Using existing vat polymerization machines, the company can release unique 3D printing materials with functional properties that can withstand real-world conditions. Rather than sell a machine and resin together, or partner with a single vendor, polySpectra is trying to sell its materials to

en-US

41:57

3DPOD Episode 115: 3D Printed Vitamins with Melissa...

3DPOD: Insight from 3D Printing Pros ·

2022/08/15

Melissa Snover got started 3D printing candy, but she saw a more meaningful opportunity in 3D printing customized vitamins. Now, you can go to the Nourish3D website, take a quiz, and get your customized vitamin gummies. The idea is that everyone, at every moment, could require a different set of nutrients. Nourish3D has developed its printers in-house to be able to make custom vitamin concoctions to order. I love this idea, the opportunity and Melissa's entrepreneurial zeal and I really hope that

en-US

45:20

3DPOD Episode 114: Industrial 3D Printing Services...

3DPOD: Insight from 3D Printing Pros ·

2022/08/08

Manufacturing consultant Ivan Madera went to California knowing no one there and little about additive manufacturing. Now, his company, Morf3D, 3D prints aerospace and defense parts to the highest tolerances. Picking up investments from EOS, Boeing, and Nikon, the company makes parts that power rockets and satellites. Ivan's ambitions stretch further still. He wants his company to partner with others to make production cells that can lead to a more industrialized form of manufacturing with 3D

en-US

38:15

3DPOD Episode 113: Industrial 3D Print Services with...

3DPOD: Insight from 3D Printing Pros ·

2022/08/02

MakerVerse is a Europe-based 3D printing service platform with global ambitions. The company aims to be the place where your orders for all 3D printing technologies come together and get fulfilled by vetted partners. Focused more on manufacturers than individuals, MakerVerse aims to be different than existing 3D printing services. The company is also different because it was founded by Siemens Energy, Zeiss, and other investors. In this episode, we hear from Marcus about the company's vision, goals,

en-US

40:17

3DPOD Episode 112: America Makes Executive Director...

3DPOD: Insight from 3D Printing Pros ·

2022/07/18

John Wilczynski is the Executive Director of America Makes. Established a decade ago, America Makes performs research coordination, workforce training and education, standards development, and more for the additive manufacturing industry. John tells us about the progress that the organization has made and the projects that they are involved in. We get a look at some of the technological challenges that America Makes is trying to solve and others that don't fit into its purview. We also get to see

en-US

39:00

3DPOD Episode 111: 3D Printing Medical Devices with...

3DPOD: Insight from 3D Printing Pros ·

2022/07/11

In our latest episode, Ajay Panwar, Sr. Engineering Manager, Design Assurance at Medtronic, discusses the intersection of quality and 3D printing for the medical field. To be clear, Ajay does not speak for or represent Medtronic on the show. He is merely sharing his ideas, knowledge, and best practices. The conversation may have been highly technical, but it does get you thinking about what goes into making a medical device with 3D printing, including the problems, issues, and opportunities.

en-US

41:25

3DPOD Episode 110: Additive Manufacturing at Ricoh...

3DPOD: Insight from 3D Printing Pros ·

2022/07/04

Enrico Gallino is a materials scientist with Ricoh. The Japanese firm has developed its own powder bed fusion (PBF) technology, rolled out a 3D printing service, has developed an anatomical model 3D printing workflow, and is establishing a binder jetting process. In a candid interview, Enrico discusses Ricoh´s role in 3D printing and what the company is doing. In particular, he details some materials he is excited about, including a thermoset PBF powder that was completely new to Max and I. Really

en-US

39:26

3DPOD Episode 109: Part Costing and Optimization with...

3DPOD: Insight from 3D Printing Pros ·

2022/06/14

Israeli firm CASTOR analyses parts. It can then tell you if the part is printable, how much it would cost in different 3D printing technologies, on which part you can save money through mass reduction and much more. CASTOR´s software is a gateway to 3D Printing. Companies can use it to jumpstart their 3D Printing projects or do an analysis of the potential for 3D Printing in their organization. We talk to CEO and founder Omer Blaier about the startup, its abilities and goals.

en-US

37:24

3DPOD Episode 108: AM for Space & Defense with Brian...

3DPOD: Insight from 3D Printing Pros ·

2022/06/07

Sintavia's Brian Neff has built a company that uses a fleet of large metal powder bed fusion systems to 3D print some of the most demanding and technically challenging parts that can be made. In the U.S. aerospace and defense markets, Sintavia is already well-known. Outside of that arena, not so much. We talk with Brian about Sintavia's journey and what the company produces. We talk about the potential of 3D printing for heat exchangers and heat sinks as well as for space. Really interesting episode

en-US

40:53

3DPOD Episode 107: Lauralyn McDaniel, Metrix Connect,...

3DPOD: Insight from 3D Printing Pros ·

2022/05/30

Lauralyn McDaniel, of ASME´s Metrix Connect, is incredibly experienced in medical device manufacturing, standards, and additive manufacturing. From the podcast episode, you can hear her brilliant mind operate as she parlays complex concepts into easily digestible material. She's a real wealth of information and we really feel like we can do another four podcasts with her about standards development, aerospace, implementing standards in your organization and more.

en-US

39:16

3DPOD Episode 106: Liquid Metal 3D Printing with Tali...

3DPOD: Insight from 3D Printing Pros ·

2022/05/23

Tali Rosman was responsible for a diverse amount of roles worldwide, including at Stratasys and the Israeli Air Force, before landing a job at Xerox. Her task, to lead Xerox's Elem Additive unit. The first job she has is to commercialise ElemX Xerox's drop-by-drop metal 3D printing technology. She tells us how she's going to do that, for what markets it is suited, and what applications she is targeting. No, this is no broad spectrum push or something targeting the usual suspects of aviation or

en-US

46:45

3DPOD Episode 105: Automated Post-Processing with...

3DPOD: Insight from 3D Printing Pros ·

2022/05/16

Joseph Crabtree's Additive Manufacturing Technologies is spreading around the world. The company has offices in four countries and its PostPro3D vapor fusion technology is growing. But, Joseph wants more. He wants to move into more post-processing technologies and make a far more integrated solution. Joseph tells us about his plans, his Brexit mitigation strategy, and how he sees the market evolving. Enjoy this episode!

en-US

46:39

3DPOD Episode 104: Large Format 3D Printing with...

3DPOD: Insight from 3D Printing Pros ·

2022/05/09

Francesco De Stefano was a consultant before he came to Caracol. You'll notice that when he answers questions about the market and the future of his firm. He had to learn a lot of other things during his time helming the large format AM startup, however. Francesco talks to us about the challenges of printing large parts, the applications, the journey his company has taken and the possibilities.

en-US

43:12

3DPOD Episode 103: Dental 3D Printing with Ankush...

3DPOD: Insight from 3D Printing Pros ·

2022/05/02

Ankush Venkatesh passionately tells us about Glidewell Dental's holistic and very vertically integrated adoption of 3D printing. The firm has had to make its own software, deploys over 400 3D printers. and is looking to make its own post-processing solutions, as well. As a large dental lab, the company also uses machine learning to automatically propose 3D printing design files in its operations. What follows is a great look into how a firm can gain a true advantage through creating and deploying

en-US

42:00

3DPOD Episode 102: 3D Printing Metamaterials with...

3DPOD: Insight from 3D Printing Pros ·

2022/04/25

Mathematician Elissa Ross is a member of MESH Consultants, which commercializes mathematical solutions for practical industry problems. METAFOLD is a MESH spinout that aims to rid us of our meshes and STLs by allowing users to create intricate and lightweight lattices and other complex structures. We loved talking to Elissa and finding out how researchers can come out of left field to solve some fundamental issues that our industry has. METAFOLD is also interesting because it has a go to market

en-US

52:18

3DPOD Episode 101: 3D Printing Conductive Inks with...

3DPOD: Insight from 3D Printing Pros ·

2022/04/13

CEO of Electroninks Brett Walker shares a roller coaster of an entrepreneur story on the 3DPOD. His company made it big early on. However, disappointment set in early. Yet, the company managed to build itself a new foundation. We talk to Brett about 3D printed inks, conductive ink, and the elusive 3D printing of circuits. We also discuss Electoninks´ Kickstarter and their development as a firm. Great episode especially if you´d like to delve into 3D printed electronics and circuits.

en-US

277 results

Similar Podcasts

Expres Ráno

Expres FM

PBS News Hour - Full Show

PBS News

CD Voice

China Daily

Israel Today: Ongoing War Report

Noa Levi

Jeffrey Epstein: The Coverup Chronicles

Bobby Capucci