x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

Ham Radio Workbench Podcast

Ham Radio Workbench

This is your bi-weekly deep dive on making, DIY, electronics, and technical topics of interest to the radio amateur. Join your host George KJ6VU and the HRWB team as they discuss current developments in ham radio while introducing listeners to a plethora of topics and skills such as test equipment, 3D Printing, Arduino, Raspberry Pi, and more. Ham radio is a hobby of hobbies - George and team introduce hams of all ages to experimenting and learning within ham radio, which can be one of the most

technology hobbies

All Episodes

02:06:13

HRWB022-Ham Radio for Makers

Ham Radio Workbench Podcast ·

2017/04/25

This week, George and Jeremy are joined by Kenneth Finnegan W6KWF and Mark Smith KR6ZY to talk about Ham Radio’s role in the “Making” hobby/community and the role of community in the “Making” portion of the Amateur Radio hobby. Kenneth Finnegan, W6KWF http://Blog.thelifeofkenneth.com https://twitter.com/KWF https://www.youtube.com/channel/UCKzaXL9_V1qxGj5lzIyLBpw Mark Smith, KR6ZY https://www.youtube.com/user/SmittyHalibut https://twitter.com/smittyhalibut/ NTP:

en

01:57:06

HRWB021-Workbench Build Projects

Ham Radio Workbench Podcast ·

2017/04/11

Join Jeremy and George as they discuss future Workbench Build projects currently under development including the Power Monitor/Low Voltage Disconnect/Power Switch and the Arduino enabled 25W Smarty Load. Jeremy Midwest RepRap Festival after action report Midwest RepRap Festival - https://www.eventbrite.com/e/2017-midwest-reprap-festival-mrrf2017-aka-mrrf-tickets-28382784673RepRap 3D Printers - http://reprap.org 3D Printing Today Podcast - http://threedprintingtoday.libsyn.com 3D Printing Nerd

en

02:48:30

HRWB020-More Listener Projects

Ham Radio Workbench Podcast ·

2017/03/28

This week, Jeremy heads to the Midwest RepRap Festival - a 3D printing gathering in Goshen Indiana. We continue our interviews with three listeners who are building interesting ham radio and electronics projects. Rex KE6MT builds a digital doorbell, Jeff KK9JEF builds a 40m CW transceiver and Don KG5IWL builds a Bit-X transceiver and a custom case. Midwest RepRap Festival (3D printing event) https://www.facebook.com/midwestreprapfest/ https://hackaday.com/tag/midwest-reprap-festival/ Icom ID-4100A

en

02:05:03

HRWB019-Listener Projects

Ham Radio Workbench Podcast ·

2017/03/14

This week Jeremy spends time with some of our listeners to talk about what’s on THEIR workbenches. We spend time with Mike KM4VKR to discuss his upgrades to the Antenna Analyzer, Vance N3VEM to talk about building his own digital mode interface for his iPhone, and Smitty KR6ZY to learn about his multi-band WSPR experiences. More interviews were recorded and will be available in a future episode. Mike KM4VKR OLED Display - https://www.adafruit.com/products/2719 OLED Graphical Display for the

en

02:39:43

HRWB018-2017 BayCon

Ham Radio Workbench Podcast ·

2017/02/28

George takes us to 2017 BayCon, the Silicon Valley’s Bay-Net annual convention. Bay-Net - http://www.bay-net.org Bay-Net Presentations/Articles - http://www.bay-net.org/articles.html

en

02:00:36

HRWB017-Remote Repeater Site Monitoring

Ham Radio Workbench Podcast ·

2017/02/14

George and Jeremy bring all of the Microcontroller knowledge together to a practical application as they break down the building of the Sierra Radio Systems Bay-Net Repeater Groups Remote Site Monitoring System. Yaesu Announces two new Handhelds FT-25R - http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=111&encProdID=79E6683CC766565D2CB197C293AB6219&DivisionID=65&isArchived=0 FT-65R -

en

02:13:20

HRWB016-Wireless Communications for Microcontrollers...

Ham Radio Workbench Podcast ·

2017/01/31

In this episode of the Ham Radio 360 Workbench, George and Jeremy continue the conversation on communicating with Microcontrollers and Single Board Computers. They deep dive on wireless ways of communicating from direct RF links to WiFi. Autodesk Eagle has moved to a subscription based license - http://www.autodesk.com/products/eagle/overview News on Autdesk Eagle Subscription Terms

en

02:42:36

HRWB015-Interfacing with Microcontrollers

Ham Radio Workbench Podcast ·

2017/01/17

George and Jeremy explore how to connect microcontrollers and single board computers to circuits and sensors to interface with the real world. They discuss both analog and digital inputs and outputs as well as the most common ways of interfacing with components such as sensors. Antenna Analyzer 3D Printed ABS Cases from Rocket City 3D - $15 - https://rocketcity3d.ecwid.com/#!/Antenna-Analyzer-Case/p/77824858/category=21090241 EEZ H24005 Open Source Lab Power Supply - $400 - 2 Channels,

en

02:23:29

HRWB014-Electronic Parts and Components

Ham Radio Workbench Podcast ·

2017/01/03

George and Jeremy explore some basic passive electronic components and parts and where to find them. LoRaHAM by Travis Goodspeed- https://github.com/travisgoodspeed/loraham Ted Okada TAPR DCC Talk- https://www.hamradionow.tv/episodes/2016/10/23/hrn-273-fema-go-big-from-the-2016-dcc Kenwood TH-D74 Firmware Updated to 1.05 - http://www.kenwood.com/i/products/info/amateur/thd74_update_e.html QRP Labs Ultimate3S Slow Speed Atmel based 200mw transmitter - http://www.qrp-labs.com WSPRLite -

en

01:53:37

HRWB013-Introduction to 3D Printing

Ham Radio Workbench Podcast ·

2016/12/20

Jeremy and George introeduce Workbench Listeners to 3D Printing technology. They provide an overview of the technology, equipment, techniques, and software needed to add 3D Printing to your workbench. Good general 3D Printing resource - https://all3dp.com 3D Printing Filament Guide - https://www.matterhackers.com/3d-printer-filament-compare 3D Printing Filament Guide - https://all3dp.com/best-3d-printer-filament-types-pla-abs-pet-exotic-wood-metal/ 3D Printer Components -

en

01:50:26

HRWB012-K6BEZ Antenna Analyzer Build

Ham Radio Workbench Podcast ·

2016/12/06

George and Jeremy breakdown what it takes to build the new HR360/K6BEZ Antenna Analyzer and where to find all the information you’ll need to make it happen!George and Jeremy breakdown what it takes to build the new HR360/K6BEZ Antenna Analyzer and where to find all the information you’ll need to make it happen! The K6BEZ antenna analyzer will provide VSWR measurements for any antenna from 1 to 30 MHz. Frequency and VSWR is shown on the built in LCD display. Data can optionally be sent over the

en

02:25:16

HRWB011-2016 Christmas Shopping Show

Ham Radio Workbench Podcast ·

2016/11/22

George and Jeremy enjoy a fireside chat about shopping for your Workbench and Shack. Antenna Analyzer Project Information - http://hamradio360.com/community/partsmaterials-list/build-project-parts-listlinks/ Everything Ham Radio Podcast - http://www.everythinghamradio.com/ QSO Today Podcast - http://www.qsotoday.com/podcasts/4z1ug Holiday project - 3D Printed Trees - http://www.thingiverse.com/thing:197668 https://www.youmagine.com/designs/christmas-tree-with-space-for-led-light#activity New

en

02:22:22

HRWB010-Introduction to PCB Design

Ham Radio Workbench Podcast ·

2016/11/08

This week, we announce the details of the Antenna Analyzer project! George teaches Jeremy about all the facets of DIY printed circuit board (PCB) design using AutodeskEagle (Show Sponsor, download for free https://www.autodesk.com/products/eagle/free-download ). George discusses Schematic Capture, Board Layout, and an overview of PCB fabrication. Antenna Analyzer BOM, designs, directions, and software available HamRadio360.com -

en

02:02:14

HRWB009-Idiot Switch

Ham Radio Workbench Podcast ·

2016/10/25

George and Jeremy KF7IJZ are joined by Beric Dunn K6BEZ and Nick Garner N3WG to design an “idiot switch” – a micro controller device that can remove power from a soldering iron when the user leaves it turned on too long (Like Jeremy himself did with a Hakko FX-888 for 2 weeks!). Teardown photos of the FX-888D: http://runawaybrainz.blogspot.com/2013/03/hakko-fx-888d-solder-station-hi-res.html Teardown video of the FX-888D: https://www.youtube.com/watch?v=Gw8e74DaE9I Teardown photos of the FX-888:

en

02:29:21

HRWB008-Introduction to the K6BEZ Antenna Analyzer...

Ham Radio Workbench Podcast ·

2016/10/11

George and Jeremy sit down with Beric Dunn (K6BEZ), the designer of the project, to introduce the Arduino powered DDS module based Antenna Analyzer! Beric is a professional RF design engineer by trade, and he wanted to provide a project that would allow a ham to learn some fundamental principles while making a useful gadget. RFinder H1A/B/C - https://www.ecwid.com/store/store10195853/ Anytone Radios - http://www.va3xpr.net/anytone-at-d868uv-dual-band-radio/ Baofeng -

en

01:59:28

HRWB007-Matt Berggren of Autodesk on Eagle and PCB...

Ham Radio Workbench Podcast ·

2016/09/27

An interview with Matt Berggren of Autodesk who is responsible for Eagle PCB tools, Autodesk Circuits, and Tinkercad at Autodesk. DVMega: http://www.dvmega.auria.nl DV4Mini: http://wirelesshold.com/dv4mini.aspx Internet Labs DVAP: http://www.dvapdongle.com/DV_Access_Point_Dongle/Home.html Kenwood TH-D74 Manual is posted – http://manual.kenwood.com/files/B5A-1253-00.pdf DStar QSO Party – http://icomamerica.com/en/amateur/qso-party/default.aspx DStar info: http://www.dstarinfo.com DStar Repeater

en

01:59:31

HRWB006-Digital Oscilloscopes

Ham Radio Workbench Podcast ·

2016/09/13

Continuing the conversation with Alan Wolke W2AEW on Oscilloscopes. This time we focus on digital oscilloscopes and how they compare with analog oscilloscopes. Alan W2AEW's Test Equipment YouTube Channel: https://www.youtube.com/user/w2aew Alan W2AEW on Twitter: https://twitter.com/AlanAtTek Packtenna: http://www.packtenna.com Pacificon 2016: http://pacificon.org Don W6GPS Videos on the Kenwood TH-D74: https://www.youtube.com/user/w6gps Interview with Don W6GPS on the Kenwood TH-D74:

en

01:39:06

HRWB005-Analog Oscilloscopes

Ham Radio Workbench Podcast ·

2016/08/30

Alan Wolke W2AEW from Tektronix joins us to talk Oscilloscopes. Alan is a field application engineer for Tektronix, the world's most well-known oscilloscope maker. He also has a YouTube channel that is chock full of great information for those wanting to better understanding oscilloscopes and test equipment in general. Alan joins us for a two part session to deep drive on oscilloscope features and applications. In part one, we introduce the oscilloscope, what it's used for, some introductory

en

258 results

Similar Podcasts

Lead With AI

Tamara Nall

Linux in the Ham Shack

Black Sparrow Media

Data Engineering Podcast

Tobias Macey

Eye On A.I.

Craig S. Smith

Reflections

Livewire Labs