x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

HVAC School - For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

business careers

All Episodes

01:25:37

Light Commercial PM Process

HVAC School - For Techs, By Techs ·

2022/10/20

Mike Klokus and Jeff Crable walk us through Kalos Services' light commercial PM process. First, we verify that everyone is clear on the agreement. Then, we start the PM with a thorough visual inspection, taking copious notes about things that look concerning. Once we’ve done a visual inspection, we clean the condensers. We try to use only water when possible, though safe cleaners may be necessary in some cases. When checking the electrical components, we make sure the wires are neat and have tight

en

12:28

Electrical Myth - Wire Length Code - Short #155

HVAC School - For Techs, By Techs ·

2022/10/18

In this short podcast, Bryan covers a common electrical myth about wire length and its relationship with the National Electrical Code. The NEC is concerned with safety—protecting buildings and people—but less so with making sure things work. Wire sizing is a common topic, and length is important because it can contribute to the voltage drop in a circuit. In many cases, we refer to the MCA (minimum circuit ampacity) to select an appropriate wire size. If you run more current through an undersized

en

39:24

Why CO2 Matters w/ Trevor Matthews

HVAC School - For Techs, By Techs ·

2022/10/13

Trevor Matthews, the founder of Refrigeration Mentor, returns to the podcast to talk about why CO2 matters in commercial refrigeration and even HVAC applications. CO2 (R-744) has entered the residential HVAC sphere in some places around the world, though it hasn’t come to the North American markets yet. CO2 is one of the most eco-friendly refrigerants on the market, with a GWP of 1, and it’s very good at moving heat. However, CO2 has some challenges, including its low critical point and higher

en

01:27:38

Electrical Basics

HVAC School - For Techs, By Techs ·

2022/10/06

This podcast is Bryan’s full-length electrical basics class for the Kalos technicians. He covers electrical theory and circuit basics. Volts, resistance, and amps all affect the behavior of electricity in circuits. These are also critical factors in electrical safety. Watts and kilowatts come from the multiplication of the volts and amps, though not every volt-amp does work; the power factor indicates how much work the volt-amps are actually doing. Some of the volt-amps are reactive (kVAR) and don’t

en

10:13

Myth: Path of Least Resistance - Short #154

HVAC School - For Techs, By Techs ·

2022/10/04

In this short podcast, Bryan debunks the myth that electricity only takes the path of least resistance. It is true that more current will typically take paths of lower resistance; it’s much easier for more electrons to flow through a path with lower resistance, which is consistent with Ohm’s law. Ohm’s law states that a circuit will have higher current with you have lower resistance so long as the voltage stays the same. In most cases, the voltage stays relatively constant; transformers don’t often

en

58:49

Dehumidification in Shoulder Seasons w/ Nikki

HVAC School - For Techs, By Techs ·

2022/09/29

Nikki Krueger from Santa Fe Dehumidifiers returns to the podcast to talk about dehumidification equipment and strategies in the shoulder seasons (spring and fall). The shoulder seasons (and the weeks leading up to them) are when many homeowners begin to notice moisture problems in their homes. HVAC units and dehumidifiers should have a king-queen relationship. The HVAC unit is the king and controls the bulk of temperature and humidity during the day, but the dehumidifier can take care of the

en

15:49

Time Management - Short #153

HVAC School - For Techs, By Techs ·

2022/09/27

In this short podcast episode, Bryan gives some quick tips for time management. You can save a lot of time by prioritizing what really matters and delegating tasks. One of the simplest but most effective ways to manage your time is to use a calendar. You can even apply the calendar to your personal life; you can get into a habit of scheduling important appointments, deadlines, and tasks. Google Calendar also allows other people to see and interact with your schedule, so it’s a great tool for

en

43:55

Become a Better Mentor w/ Eric Kaiser

HVAC School - For Techs, By Techs ·

2022/09/22

Eric Kaiser returns to the podcast to talk about how to become a better mentor. He explains the topic from the perspective of a mentor and a mentee. The goal of mentorship is to pass your knowledge on to someone else. When you give someone the knowledge to succeed in the HVAC/R trade, you move the trade forward and allow yourself to try new career opportunities when someone can replace you. Some of the most effective mentorship strategies establish the mentor as a guide rather than someone who

en

43:04

HVAC Measurement Types and Benefits

HVAC School - For Techs, By Techs ·

2022/09/15

Eric Kaiser joins the HVAC School podcast to talk about HVAC measurement types and the benefits of taking each one. He also talks about point measurements and data trends. Point measurements include static pressure, voltage readings, and readings provided by gauges. We only take those measurements once. However, when you track those on several occasions over time, you can build data trends. Single-point measurements give us information about what is happening at the moment, but they don’t give us a

en

55:03

Ventilation and 62.2 Intro & Rant w/ Genry Garcia

HVAC School - For Techs, By Techs ·

2022/09/08

Genry Garcia joins the podcast to give an intro to ASHRAE Standard 62.2. He and Bryan also share a nice rant about accountability in HVAC design. Standard 62.2 is the ventilation standard for low-rise residential buildings, which dilutes airborne contaminants like VOCs and CO2. Before coming up with a ventilation strategy, we need to assess the leakage rate of the building, such as via a blower door test. However, we also need to consider how bringing in outdoor air might negatively affect

en

47:04

Pressure Enthalpy without Tears

HVAC School - For Techs, By Techs ·

2022/09/01

RACT manual co-author Eugene Silberstein joins the podcast to talk about the titular topic of his book, Pressure Enthalpy Without Tears. Pressure Enthalpy Without Tears is a book that introduces engineering concepts to HVAC technicians in a way they can understand and apply in the field. Enthalpy is a fancy way of saying “heat,” and we use it to refer to the total heat content (BTUs). The pressure-enthalpy chart shows the relationship between the refrigerant pressure and enthalpy in a system; it’s

en

10:06

Total Heat of Rejection - Short #152

HVAC School - For Techs, By Techs ·

2022/08/30

In this short podcast, Bryan talks about THOR, total heat of rejection. He explains what it is and why we should care about it when working on HVAC/R systems. THOR is another aspect of pressure-enthalpy calculations, along with net refrigeration effect (NRE) and total heat of compression. When we talk about system capacity, we’re often referring to heat absorbed in the evaporator coil (NRE). Heating is on the opposite side of the coin; when we bring heat into a home, we care more about how much

en

01:18:40

Hard Start vs. Easy Start

HVAC School - For Techs, By Techs ·

2022/08/25

Matteo Giovanetti from Micro-Air joins the HVAC School podcast to talk about the differences between a hard start and an EasyStart. Micro-Air’s “EasyStart” provides a soft start rather than a hard start. A hard start abruptly ramps up the voltage and current to the motor start; a soft start is a much gentler start that results from a gradual voltage and current increase on the start AND run windings. The EasyStart marks a paradigm shift in how we think about “saving” compressors. It attempts to

en

08:30

Heat of Compression - Short #151

HVAC School - For Techs, By Techs ·

2022/08/23

In this short podcast, Bryan explains what the heat of compression is and why we should care about it as HVAC/R professionals. More heat is rejected in the condenser than absorbed in the evaporator coil, and that’s because the compressor adds heat. That added heat is called “heat of compression.” That heat does NOT contribute to the net refrigeration effect (NRE), as it doesn’t contribute to cooling. When we compress something, we increase the system entropy during that process. Entropy is the waste

en

40:56

Intro to ACCA Manual T

HVAC School - For Techs, By Techs ·

2022/08/18

Ed Janowiak joins the podcast to introduce us to ACCA Manual T. Compared to other manuals, Manual T is one of the least-considered ACCA manuals. However, it’s the manual that advises us on how not to blow high-velocity air on people and has maintained the same standards since the mid-1900s. Unlike Manuals J, S, and D, Manual T is not recognized in code compliance. Manual T deals with air distribution; it helps us find out the throw and spread, which informs our ductwork design in Manual D. We need

en

12:22

Net Refrigeration Effect - Short #150

HVAC School - For Techs, By Techs ·

2022/08/16

In this short podcast, Bryan explains what the net refrigeration effect (NRE) is and how it affects HVAC systems. The net refrigeration effect (NRE) is what happens in the evaporator coil. The evaporator is the heat absorber; as air passes over the coil, the cooler refrigerant within the evaporator absorbs that heat and boils. The NRE is the net energy change that occurs during that process. You can plot the NRE on a pressure-enthalpy chart. When air moves over the evaporator coil, there is a change

en

54:13

Systems Thinking - Gas and Combustion

HVAC School - For Techs, By Techs ·

2022/08/11

Eric Kaiser returns to the podcast to talk about how we can use systems thinking to approach gas appliances and combustion in HVAC installation and service. Gas lines can be made of a few different materials, including black iron, copper, and CSST. These all have benefits, setbacks, and appropriate applications. For example, copper is common in propane (LP) systems but not natural gas. In coastal environments, galvanized pipe tends to be most common due to the increased likelihood of corrosion. Gas

en

59:11

HVAC School Admin Discussion - Moderating a...

HVAC School - For Techs, By Techs ·

2022/08/04

Some admins from the HVAC School Facebook group join the podcast to discuss the art of moderating a successful community. Bryan is joined by Eric Kaiser, Ty Branaman, Michael Housh, and Neil Comparetto. A community based on a skilled trade gives people an inviting space to share information and ask questions. It’s also a space that allows people to practice how they present information. Groups also connect people across geographical locations, and we can get regional perspectives that change the way

en

46:38

Systems Thinking - HV / LV / Condensate

HVAC School - For Techs, By Techs ·

2022/07/28

Eric Kaiser returns to the podcast to discuss high-voltage wiring, low-voltage wiring, and condensate assemblies as they relate to systems thinking. On the high-voltage side, the disconnect should be in a secure location, and it should be able to keep water out. The wires should be appropriately sized, have an appropriate level of tension, and should not be vulnerable to chafing or abrasion. Overall, best practices include using proper grommets and ensuring that you have a solid connection. Do not

en

33:37

Systems Thinking - Copper & Line sets

HVAC School - For Techs, By Techs ·

2022/07/21

Eric Kaiser returns to the podcast to talk about how copper, piping, and line sets play into systems thinking. Nowadays, we have to think about POE and PVE oil, and we need to design line sets in a way that assists with oil carry while preventing liquid refrigerant migration. The height of the evaporator relative to the condenser is a major factor to consider during the design phase. Especially when chases are run underground, we need to watch for possible threats to the copper. Water softener

en

880 results

Similar Podcasts

TaxTalent.com The Golden Rule Podcast

Adam Golden

TaxTalent.com Podcast

Tony Santiago

Handelsblatt Crime - spannende Streitfälle der deutschen Wirtschaft

Ina Karabasz, Solveig Gode, Sönke Iwersen

Deffner und Zschäpitz – Der Wirtschafts-Talk von WELT

WELT

Black Box - La scatola nera della finanza

Guido Brera e Gian Luca Comandini -...