x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

3DPOD: Insight from 3D Printing Pros

Hosted by Joris Peels (3DPrint.com, Executive Editor) and Maxwell Bogue (3Doodler, Co-Founder & Investor), 3DPOD brings 3D printing & additive manufacturing news and insight, with straight talk from two bona fide 3D printing pros.

news tech news

All Episodes

50:23

3DPOD 237: 3D Printing in Golf with Ryan Roach,...

3DPOD: Insight from 3D Printing Pros ·

2025/01/22

In this episode of the 3DPOD, we take a deep dive into 3D printing for golf. Cobra PUMA Golf has gone further than other firms, employing Multi Jet Fusion, binder jet, and powder bed fusion for production golf clubs. Better putters and metal drivers are now achievable through 3D printing. But how did Ryan Roach, Cobra Golf’s Director of Innovation, and his team make this possible? What challenges did they face? And is 3D printing a passing trend in golf or a fundamental evolution? Our producer Jake

en-US

50:00

3DPOD 236: AM Materials Science & Applications with...

3DPOD: Insight from 3D Printing Pros ·

2025/01/20

Nick Sonnentag is a Senior Principal Engineer at Oshkosh, where he contributes to the development of some of the world's toughest vehicles using additive manufacturing (AM). Drawing on experience from ATI, DuPont, and more, Nick possesses broad and deep expertise in 3D printing. In this episode of the 3DPOD, we discuss alloys, vehicle manufacturing, applications, and the readiness of directed energy deposition technology for widespread use. Not limiting his exploration of 3D printing to his work at

en-US

43:09

3DPOD 235: 3D Printing in the FBI and More with Kevin...

3DPOD: Insight from 3D Printing Pros ·

2025/01/14

Kevin Ayers spent 30 years at the FBI, contributing to groundbreaking engineering initiatives for the Bureau and beyond. On this episode of the 3DPOD, we're fortunate to have Kevin sharing some of his once-classified insights on our podcast. It's fascinating to learn how the FBI utilized 3D printing and just how long they’ve been exploring this technology.In addition to his FBI tenure, Kevin has been instrumental in 3D printing's success for nearly two decades, worked at Danfoss, and currently

en-US

51:03

3DPOD 234: Military & Government AM with Andy Davis,...

3DPOD: Insight from 3D Printing Pros ·

2025/01/06

Andy Davis is Director of Government Solutions at The Barnes Global Advisors. Previously he was at the DOD and the US Army in various logistics, program management, technology advisory roles. In the podcast we discuss austere 3D printing, 3D Printing at the point of need, drones, the military at large and much more. It's clear that the Navy and Air Force are investing in AM and we delve into the why and what of it. Andy´s views and opinions are steeped in experience and this is a very helpful

en-US

46:47

3DPOD 233: Sustainable Manufacturing with Kate Black,...

3DPOD: Insight from 3D Printing Pros ·

2024/12/30

Kate Black is the Chief Executive Officer of Atomik AM, where she leads a team dedicated to fostering innovation and developing integrated advanced manufacturing solutions. The company specializes in electronics 3D printing, jetting technologies for novel materials, coatings, and multi-material 3D printing. Additionally, she serves as a Professor of Manufacturing at the University of Liverpool. In this episode of the 3DPOD, Kate shares her technical vision and a forward-looking perspective that will

en-US

54:52

3DPOD 232: Melissa Orme, Vice President of AM at Boeing

3DPOD: Insight from 3D Printing Pros ·

2024/12/23

Melissa Orme played a pivotal role as CTO at Morf3D, transforming the company from a standard service bureau into a leader in aerospace 3D printing that went on to be acquired by Nikon. Now at Boeing, as Vice President of Additive Manufacturing (AM), she spearheads the company’s 3D printing initiatives, aiming to integrate AM wherever practical. Boeing, which has a longstanding lead in low-rate 3D printing production and manufacturing thousands of parts for civilian aircraft, benefits from Melissa's

en-US

47:35

3DPOD 231: Incubating AM with Sascha Schwarz, CTO of...

3DPOD: Insight from 3D Printing Pros ·

2024/12/16

Sascha Schwarz is a researcher dedicated to aiding his university, Technical University of Munich (TUM), to foster innovation as CTO of TUM Venture Labs. In this episode of the 3DPOD, we explore diverse startups, the challenges faced by scientists transitioning into entrepreneurial roles, and the incubation of new ventures. Topics include technology transfers, development, and the essential qualities of a successful startup. This conversation is a must-listen for university professionals looking to

en-US

52:57

3DPOD 230: AM for Aerospace, Defense and More with...

3DPOD: Insight from 3D Printing Pros ·

2024/12/09

Tim Simpson is an advisor to NASA, Professor Emeritus at Penn State, and a consultant for Xact Metal. He is also associated with The Barnes Global Advisors, among numerous other engagements. In this episode of the 3DPOD, our discussion delves into defense, space, and the future of additive manufacturing, exploring critical topics such as commoditization, drones, and advancements in software. It’s an engaging conversation for anyone keen to understand the current state and trajectory of additive

en-US

41:41

3DPOD 229: 3D Printing Then and Now with James...

3DPOD: Insight from 3D Printing Pros ·

2024/12/02

Jim Harrison is a true 3D printing veteran. Currently working at MELD Manufacturing, he has also contributed his expertise to nScrypt, Cimquest, and other notable organizations. As a co-founder of one of the world's first service bureaus and an early pioneer in vat polymerization for medical devices, he operated one of the earliest vat polymerization printers at Pratt & Whitney. Jim's insights and vision not only highlight the evolution of additive manufacturing but also underscore the progress made

en-US

41:08

3DPOD 228: Filament and Print Services with Trent...

3DPOD: Insight from 3D Printing Pros ·

2024/11/25

Trent Esser founded Printerior with his partners and has since pivoted and redefined the company’s focus multiple times. Printerior operates as a 3D printing service that both sells and recycles filament. The company employs a diverse range of equipment, including inexpensive desktop machines, Bambu Lab systems, and large-format printers.Despite producing hundreds of thousands of parts, Printerior has chosen to forgo powder bed fusion, instead focusing on material extrusion. This approach allows

en-US

43:52

3DPOD 227: 3D Printing Optimization with Harshil...

3DPOD: Insight from 3D Printing Pros ·

2024/11/18

Harshil Goel founded Dyndrite as a kernel designed for 3D printing. While this core technology remains available for OEMs and software firms, the company now also offers a tool that provides users with greater control over laser operations and settings. In this episode of the 3DPOD, Harshil explains what Dyndrite does and how it is being utilized. We discuss innovative approaches to using, modifying, and adapting settings, as well as methods to accelerate manufacturing processes. Faster build rates

en-US

46:09

3DPOD 226: Simulation and Optimization with Pan...

3DPOD: Insight from 3D Printing Pros ·

2024/11/11

Pan Michaleris has been working in finite element analysis (FEA) and related fields for decades. As a professor, he contributed significantly to the discipline and later developed CUBES, which was eventually acquired by Autodesk. The CUBES simulation tool is now a key component of Fusion. Since, Pan has established another company, Pan Optimization, whose primary product, PanX, is designed to transform how FEA is conducted. The tool is optimized to run on standard desktop machines, enabling users to

en-US

48:58

3DPOD Episode 225: Oil & Gas 3D Printing with Cassidy...

3DPOD: Insight from 3D Printing Pros ·

2024/11/04

In this episode of the 3DPOD, Cassidy Silbernagel, Head of AM Engineering at Exergy Solutions, takes some time to discuss design for additive manufacturing (AM) and 3D printing, with a strong focus on the energy industry. He explains why oil and gas represent a major growth area for AM, covering the industry’s standards, motivations, and the types of parts being 3D printed. Cassidy dives into materials like Inconel, highlighting their importance to these companies, and provides insights into the

en-US

50:36

3DPOD Episode 224: The Business of WAAM with Mark...

3DPOD: Insight from 3D Printing Pros ·

2024/10/28

Lincoln Electric is a storied, large company in welding. The company collaborated with Oak Ridge National Laboratory to develop a welding technology that is now actively used in production. Lincoln Electric manufactures oil and gas pressure vessels, industrial components, and submarine parts. In this episode of the 3DPOD, Mark Douglass, Business Development Manager for Lincoln Electric Additive Solutions, shares insights about the company’s journey in additive manufacturing and its growth ambitions

en-US

41:49

3DPOD 218: AM Polymers with Dr. Krysten Minnici, Arkema

3DPOD: Insight from 3D Printing Pros ·

2024/09/16

Dr. Krysten Minnici is a scientist who now works in business development at Arkema. In this episode, we discuss PEKK, PAEK, polymers, powder bed fusion materials, recycling rates, 3D printing material development, and more. We also cover Rilsan, plant-based polymers, sustainability, and new applications. Krysten takes the time to explain key concepts about polymers and performance. This is a great episode to learn about high-performance polymers and additive.Disclaimer: Views expressed here are

en-US

50:48

3DPOD 315: 3D Printing Industry Insights with...

3DPOD: Insight from 3D Printing Pros ·

2024/08/26

Matthias Schmidt-Lehr began his career at Laser Zentrum Nord, now known as Fraunhofer IAPT. He later became a researcher at the University of Hamburg before co-founding the startup Bionic Production. Afterward, Matthias decided to launch AMPOWER, a 3D printing consultancy that publishes research reports and assists companies in the additive manufacturing sector. In our conversation, Matthias shares his journey in additive manufacturing, explains how his company has evolved, and discusses the ways

en-US

46:01

3DPOD 215: Aleksander Ciszek, 3YOURMIND CEO

3DPOD: Insight from 3D Printing Pros ·

2024/08/19

Aleksander Ciszek co-founded 3YOURMIND and has helped build the business over the past decade. In this episode of the 3DPOD, he discusses pivots, strategy, software, defense, energy, growth, and more. We appreciated learning from Aleksander's perspective on strategy and the market in general. He also shares insights on the future of maintenance, repair, and overhaul; the digital warehouse; and 3D printing. How should a company like 3YOURMIND position itself in the software market, and what does its

en-US

47:15

3DPOD 214: Brigitte de Vet-Veithen, Materialise CEO

3DPOD: Insight from 3D Printing Pros ·

2024/08/13

Brigitte de Vet-Veithen, who previously led Materialise's medical unit, has transitioned into the CEO role at the 3D printing service and software firm. In our discussion, we explore what makes Materialise unique. We also delve into the potential of each of the company's units, discussing opportunities for implants in the developing world, personalized implants, medical software, the cloud, desktop 3D printing, manufacturing, aerospace, and more.

en-US

41:00

3DPOD Episode 213: 3D Printed Personalized Medicine...

3DPOD: Insight from 3D Printing Pros ·

2024/08/12

Wei Jiang founded medicine 3D printing startup Craft Health as a Pharmacy student. I love it when practitioners and people from other backgrounds establish 3D printing companies. It often leads to user-driven companies that cater well to those trying to use additive manufacturing. In this episode of the 3DPOD, we follow Craft Health’s journey from inception to funding and the release of the firm's 3D printer for pharmaceuticals. We discuss release kinetics, approvals, drug delivery, compounding

en-US

38:26

3DPOD 212: Chuck Hull and the Invention of 3D Printing

3DPOD: Insight from 3D Printing Pros ·

2024/08/08

40 years ago today, on August 8, 1984, Charles Hull filed a patent application for stereolithography (SLA), the first additive manufacturing technique in history. We're honored to have Chuck Hull on the 3DPOD podcast today. Chuck tells us how he started 3D Systems (NYSE: DDD), scaled the company, and shares some of the secrets of his success. We discuss how the industry is evolving, tough times, why he still comes into the office, and his fascination with bioprinting. We loved talking to Chuck!

en-US

267 results

Similar Podcasts

Expres Ráno

Expres FM

PBS News Hour - Full Show

PBS NewsHour

CD Voice

China Daily

Israel Today: Ongoing War Report

Noa Levi

Jeffrey Epstein: The Coverup Chronicles

Bobby Capucci