x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

HVAC School - For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

business careers

All Episodes

06:41

Push Pull Recovery - Short 119

HVAC School - For Techs, By Techs ·

2021/06/08

In this short podcast episode, Bryan discusses push-pull recovery, how it works, and what we need to know about it. Push-pull recovery is a somewhat counterintuitive method of recovering liquid rapidly. We simply do that by pulling refrigerant out of the system and pushing it into the tank. However, when we pack refrigerant into a tank, the tank pressure and temperature increase. So, it can be more difficult to get refrigerant into the tank as the job goes on. When we recover liquid refrigerant on

en

05:01

Small System Vacuum Tip - Short 118

HVAC School - For Techs, By Techs ·

2021/06/01

In this short podcast episode, Bryan goes over one of his most valuable tips for pulling a vacuum on a small system. It can be very difficult to pull a vacuum on a small system, especially when you're dealing with a low-temperature application like a freezer. When you pull a vacuum, you're creating a low-pressure area that affects molecule behavior. So, you're creating a situation where the molecules push their way out of the system and into your vacuum pump. The low temperature and small tubing,

en

50:01

How to END Callbacks

HVAC School - For Techs, By Techs ·

2021/05/20

In this podcast episode, Bryan and Eric Mele explain how HVACR technicians can END callbacks with a few best practices. Rushing through calls will often lead to callbacks. One of the most common mistakes techs make is failing to check the condensate drain before walking away from a job. To end callbacks, technicians would be wise to check the entire system and note any possible problem areas; in commercial HVAC and refrigeration, pay attention to variation across evaporators, condensers, and

en

31:53

Compressor Overheating Diagnosis & Prevention

HVAC School - For Techs, By Techs ·

2021/05/13

In this podcast episode, Bryan and Eric Mele discuss the diagnosis and prevention of compressor overheating in HVAC and refrigeration. The main causes of compressor overheating are inadequate cooling back to the compressor, low charge, restrictions, and sometimes even poor suction line insulation. We want to keep the suction temperature low while maintaining appropriate superheat. If the suction line temperature is too high, the compressor can't cool down well enough. Dirty condenser coils, low

en

08:53

Re-tapping Transformers - Short 117

HVAC School - For Techs, By Techs ·

2021/05/11

In this short podcast episode, Bryan and Eric Mele talk about re-tapping transformers for single-phase equipment in 208v applications. Most single-phase equipment can work for 230v or 208v, meaning that they can operate with low voltage. However, we typically see 208v in commercial buildings. The sine waves of 208v equipment are 120 degrees out of phase, not 180 degrees (as in split-phase applications). We get lower voltage from leg to leg (208v, though the voltage can be a little higher or lower)

en

49:28

Indoor Air Quality Map & Compass w/ TZOA

HVAC School - For Techs, By Techs ·

2021/05/06

In this podcast episode, Ben Reed from TZOA, a disruptive air technology brand, joins us to discuss the indoor air quality map and compass. We spend a majority of our lives indoors, so TZOA tries to improve IAQ in homes to keep us healthier. HVAC manages airborne chemicals, so indoor air quality ties right into our industry; HVAC technicians will become more valuable when they become well-versed in IAQ technologies. In residential HVAC, we are already used to listening to customer complaints and

en

41:32

Copeland 2-stage ZPS Scroll Compressors

HVAC School - For Techs, By Techs ·

2021/04/29

In this podcast episode, Bryan and Trevor Matthews of Emerson Canada discuss the Copeland 2-stage ZPS scroll compressors. Please join us by following along in bulletins AE4-1428 and AE4-1365. The ZP91KCE to ZP143KC Copeland compressors don't have internal pressure reliefs (IPRs). Those higher-pressure compressors make very loud noises when they go off, and it'll blow hot discharge gas on the internal overload to shut down the compressor. Some scroll compressors have temperature operating disks

en

38:06

Screw Compressor Talk w/ Vilter

HVAC School - For Techs, By Techs ·

2021/04/22

In this podcast episode, Bryan, Trevor Matthews, and Jim Dick of Emerson talk about the screw compressor and how it works. This time, they focus on the Vilter single-screw compressors. Vilter is an industrial compressor division of Emerson (compare to Copeland). Vilter also makes reciprocating compressors, but the screw compressor is its claim to fame; you may want to consider using a screw compressor when you want greater capacity and control than a reciprocating compressor. Screw compressors also

en

16:09

Condensation Problem Solving - Short 116

HVAC School - For Techs, By Techs ·

2021/04/20

In this short podcast episode, Bryan talks about condensation and how HVAC technicians can solve condensation-related problems. He also discusses humidity control and how that can affect sweating. We may have heard the phrase, "Condensation is where hot meets cold." That's not necessarily true; while it may seem that sweating happens where hot meets cold, the dew point is the main cause. We won't see condensation unless we have air that reaches the dew point. When air flows across surfaces that have

en

46:05

ECM Types and Applications

HVAC School - For Techs, By Techs ·

2021/04/15

In this podcast episode, Bryan and Chris Mohalley of Regal Beloit discuss the different types of ECM. They also cover applications where you can expect to find ECMs. In the HVAC industry, we typically use three types of motors: constant-torque, constant-airflow, and constant-speed. Every ECM works on electronic commutation, so constant-torque motors use that to maintain torque output (X13). The constant-airflow motor is also known as the variable-speed motor, and it is one of the first ECM types. We

en

46:13

The Right and Wrong Way to HVACR w/ Eric Kaiser

HVAC School - For Techs, By Techs ·

2021/04/08

In this podcast episode, Bryan and Eric Kaiser discuss the right and wrong way to do HVAC/R jobs and approach HVAC/R work. Breaking things down into "right" and "wrong" categories is a rather simple way to approach a problem; we throw nuance and alternatives out the window, which can be worse than doing something "wrong." Instead of viewing things as right and wrong, we would be better off if we looked at our objectives and focused on solving problems instead of being right. Although there are

en

47:50

How EC Motors Work

HVAC School - For Techs, By Techs ·

2021/04/01

In this podcast episode, Bryan and Chris Mohalley from Regal Beloit discuss EC motors. They also describe ECM applications and how those motors work. EC motors (ECMs or "ECM motors") are electronically commutated motors. These motors are generally three-phase AC motors operated by a drive; that drive is a combination of an AC-to-DC converter, microprocessor, and frequency drive. So, the frequency delivered to the motor is generated electronically. When it comes to inputs, the ECM works like a

en

13:12

Stacking Liquid vs. Mechanical Subcooling - Short 115

HVAC School - For Techs, By Techs ·

2021/03/30

In this short podcast episode, Bryan compares strategies for increasing the subcooling, including stacking liquid and mechanical subcooling. Subcooling is a consequence of condensing; when we change the refrigerant from a vapor to a liquid, it will drop below saturation temperature after it becomes completely liquid. There are three phases in the condenser: desuperheating, condensing, and subcooling. The first few rows of the coil reduce the superheat of the vapor entering the condenser. Once there

en

56:36

Proper Design For Ductless and Ducted HVAC Systems

HVAC School - For Techs, By Techs ·

2021/03/25

In this podcast episode, Bryan, Chad, John, and Allison discuss proper design for ductless and ducted HVAC systems, especially mini-splits. They also discuss potential future improvements to equipment and duct designs. Mini-splits are smaller than traditional HVAC units, so they make zoning a bit easier. However, load calculation plays a huge role in equipment selection and zoning because you must get the right number of zones to match the equipment capacity and meet your load requirements. Proper

en

13:22

Atmospheric Pressure - Short 114

HVAC School - For Techs, By Techs ·

2021/03/23

In this short podcast episode, Bryan explains what atmospheric pressure really is, pressure units and conversions, and why those are matter. Atmospheric pressure is the weight of the air around us pushing down on us. We normally see that value expressed as 14.7 PSI (or 0 PSIG). Before we dive too deep into atmospheric pressure, we should understand some basic pressure units. We may see pressure expressed in microns when we're pulling a vacuum; we are trying to pull the atmosphere out of the system,

en

36:14

Diagnose and Prevent Compressor Short Cycling

HVAC School - For Techs, By Techs ·

2021/03/11

In this podcast episode, Bryan and Trevor Matthews discuss compressor short cycling. They discuss how to diagnose and prevent that issue. Trevor and Bryan primarily refer to the Bulletin AE17-1262 throughout this episode, which you can find HERE. Compressor misdiagnosis is very common, but we generally encounter two types of compressor failures: electrical failures and lubrication failures. Short cycling causes a loss of oil in the compressor, which may lead to lubrication-related failure. Each

en

30:15

Recovery Tips and Best Practices w/ AC Service Tech

HVAC School - For Techs, By Techs ·

2021/03/04

In this podcast episode, Bryan and Craig Migliaccio (AC Service Tech) discuss some HVACR recovery tips and best practices. When you select a recovery tank, you need to know which refrigerant is in the tank. So, it's a good idea to make sure you label each recovery cylinder. You don't want to contaminate refrigerant in the recovery tank, use a recovery tank with contaminated refrigerant, or have too much air inside the cylinder. If the tank is empty, you'll have to pull a vacuum on it before you use

en

25:04

Swaging and Flaring Tips w/ AC Service Tech

HVAC School - For Techs, By Techs ·

2021/02/25

In this episode, Bryan and Craig Migliaccio (AC Service Tech) talk about some best practices you can use while swaging and flaring copper. There are a few different ways you can flare copper. Craig likes using a round deburring tool before flaring the copper. After the burr has been cleanly removed, Craig likes using an eccentric flaring tool for the actual flaring. Bryan's favorite flaring tool is the NAVAC battery-powered flaring tool for quick, accurate flares. Both Craig and Bryan agree that

en

33:21

Are Contactors Obsolete? (SureSwitch)

HVAC School - For Techs, By Techs ·

2021/02/24

In this podcast episode, Bryan and Jim Fultz discuss the White-Rodgers SureSwitch and determine whether contactors are obsolete or not. Contactors are electrical controls; they started off very expensive and usually outlasted equipment, so they are currently smaller, cheaper, and less durable than they used to be. Modern contactors have open contacts and are susceptible to insect damage. Sometimes, an electrical arc can cause contactor pitting, which can weld the points together and render the

en

07:07

Don't Miss The Tech Training Event

HVAC School - For Techs, By Techs ·

2021/02/23

en

881 results

Similar Podcasts

TaxTalent.com The Golden Rule Podcast

Adam Golden

TaxTalent.com Podcast

Tony Santiago

Handelsblatt Crime - spannende Streitfälle der deutschen Wirtschaft

Ina Karabasz, Solveig Gode, Sönke Iwersen

Deffner und Zschäpitz – Der Wirtschafts-Talk von WELT

WELT

Black Box - La scatola nera della finanza

Guido Brera e Gian Luca Comandini -...