x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

WTFFF?! 3D Printing Podcast Volume Three: 3D Print Tips | 3D Print Tools | 3D Start Point

Tom Hazzard & Tracy Hazzard

This is the Third 200 episodes of the WTFFF?! 3D-Printing Podcast. WTFFF?! Co-hosts Tom & Tracy Hazzard focus on the what of Fused Filament Fabrication (3D Printing), what design software to use, what printer to buy, what tools to use, what designs should you print, what new materials are out and what your business strategy should be. On the 3D Printing Podcast, they interview the who is who in 3D Print art and design along with others who can help you figure out your what. They share with you

news tech news

All Episodes

30:49

Bevel 3D Scanner Review

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/09/05

We’re going to review the Bevel today. This is a 3D scanner that goes on your phone, a handheld scanner. It was a Kickstarter by Matter and Form. We’re going to share how we tested it and tried out, and what results we got from it. We’re also going to discuss some of the areas that we think could be improved, both with the product itself and from a business standpoint. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its

en-us

57:32

A 3D Print STEM Ambassador with Grant Mackenzie of CEL

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/31

I have a great interview with Grant Mackenzie. He is the sales manager for CEL who does what I’ve referred to in the past as the CEL Robox 3D Printer. Those of you that have listened to Tracy and I for a long time know that we saw their CEL Robox 3D Printer at CES in 2016. That’s more than eighteen months ago, January of 2016. We were very impressed with this 3D printer. We had arranged and we’re told originally we were going to get a review unit. For one reason or another, just the circumstances

en-us

14:40

Free CAD Software Is Not Always Free

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/30

In today’s episode, Tom and Tracy Hazzard talk about free CAD software, and how most of them are not really free. These software usually come at the price of privacy, of dealing with ads, of having your profile up there on the internet, etc. They discuss some possible ways to change things for the better. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free, so ask away and and don’t forget to subscribe so you

en-us

22:51

CAD Part Size vs. Actual 3D Printed Size

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/29

In today’s episode, Tom and Tracy Hazzard talk about CAD part size versus going to your actual 3D printed size. They discuss how and why this is a problem, and also provide some great tips and examples of what you can do to avoid this problem or how you can deal with it when such issues with actual 3D printed size arise. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free, so ask away and and don’t forget to

en-us

35:12

3D Printing in Fashion with Stephania Stefanakou

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/24

Stephania Stefanakou, who we’re going to talk to today, she’s out of Toronto. She not only has an artistic approach mindset. She really wants to take emerging technology like 3D printing in fashion and help the fashion industry move forward and really make wearables wearable. Wearables differently than you might think. Wearable is going to be an overused term in the industry. You say wearables, people naturally think of the Fitbit, SCOTTeVEST or maybe smart shoes that have a chip in them and this is

en-us

15:45

Where to Find 3D Print Files

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/23

In today’s episode, Tom and Tracy Hazzard talk about where to find 3D print files. Not only that, but specifically where to find 3D print files that are good, that are actually printable, and that will work for your printer. They provide examples of where they find some 3D print files themselves and how some of these sites work. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free, so ask away and and don’t

en-us

18:12

3D Print Lithopanes

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/22

In today’s episode, Tom and Tracy Hazzard talk about 3D Print Lithopanes. They’ve played around and experimented with it themselves and explain how they did it and what software they used. They also give great examples of how you can use 3D print lithopanes in your business, to make an impression and make sure that people don’t forget you. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free, so ask away and

en-us

44:45

3D Print Legal Task Force with Farah Tabibkhoei of...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/17

We’ve come to meet another person involved in the 3D printing industry from a legal perspective and from a different legal perspective than we’ve interviewed in the past. We tended to interview people who have much more of an intellectual property background and/or directly corporate attorneys for someone in the 3D print industry. We’ve done that way. In this case, Farah Tabibkhoei of Reed Smith is a Senior Associate there but she’s also a founding member of a 3D print legal task force that they’ve

en-us

20:43

3D Print Opportunity Cost

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/16

In today’s episode, Tom and Tracy Hazzard talk about the opportunity cost of 3D printing. They go through their own genesis story with 3D printing and how they saw that not buying a 3D printer would cost them a great opportunity. They also go into how 3D printing changes your production process, your design process and it’s helping you with your business that not doing it really is a missed opportunity. Tom and Tracy also discuss how a leap of faith is needed but you have to think about the

en-us

18:39

Cheap 3D Printers

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/15

Today, we’re going to talk cheap 3D printers. We were really impressed to find and to learn that there are some really cheap 3D printers out there. If that’s your biggest limiting factor is cost. They’re kits though, we have to be really careful that most of the ones with the cheap prices and the one we’re particularly talking about, the Lewihe. It stands for length, width, height, the first two letters of each. It’s not bad looking for what is a $75 printer. It’s a kit printer. To send us a

en-us

33:21

3D Printed Self Driving Vehicles with Buddy Bernhard...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/10

This is a big episode. Seriously, the biggest 3D parts I’ve encountered are what we’re going to talk about today. I’m so excited about this episode. I really love Buddy Bernhard from Local Motors, which is who we are going to talk to. We’re going to talk cars, 3D printed cars if you didn’t guess already. He just has such a passion for 3D printing in general. I love the whole model, that you’ll hear as we go forward and listen to this episode, about really how open they are about sharing what they’re

en-us

22:09

Reasons to Buy a 3D Printer

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/09

In today’s episode, Tom and Tracy Hazzard answer one of the most common questions they get asked. “Why should I buy a 3D printer? Should I buy a 3D printer? Is it for me?” They share their thoughts on what they think are the best reasons, and also some reasons not to buy one. They also share some of their personal experience with their daughter to show how buying a 3D printer may really be for you. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our

en-us

31:05

Matter and Form 3D Scanner Review

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/08

Today, we’ve got another in our series of product reviews. It is a review of our experience with the Matter and Form desktop 3D Scanner. For those of you who have been following the podcast, that is a big deal if you’ve known us, if you’ve listened to a lot of episodes. We don’t usually scan. We talk about that, I don’t know how many times. It’s a big deal. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free,

en-us

39:48

High Quality 3D Scanning and Computer Modeling with...

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/03

We’ve got a really good interview today that I think takes us further into the whole 3D scanning and creating a real product out of that exploration. I was at CEO Space, which is our networking and executive and entrepreneurship education forums we participate in quite a few times a year. They have five of them. We’ve done two this year or something like that already. It’s just one of those things where you meet people and they know that we are in the 3D printing industry and they bring me things

en-us

30:29

3D Printed Wedding Favors

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/02

In today’s episode, Tom and Tracy Hazzard share their experience creating 3D printed wedding favors for their daughter’s wedding. They talk about how much time it took to create the designs, to test print and iterate, and to do the actual printing. They provide tips that you can apply to your situation if you ever have to 3D print wedding favors or things of that nature for yourself, a friend or relative, or for your business. They also explain how 3D printing has added a very personal touch to the

en-us

9:34

Tom and Tracy are Back!

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/08/01

We are back. We were gone a lot longer than we thought. It was one of those things where in April, things just started to get overwhelming with everything that we have going on in our business, in our personal lives. We thought it was going to be a short hiatus and then it turned into a bit of a longer hiatus. We realized we’ve never taken a vacation from our 3D print podcast since we started it. We really appreciate your patience with us and that you’re back with us as well. Thanks again guys, for

en-us

45:49

Power Advice From A SolidWorks Expert

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/04/20

We had a listener communicate with us over Facebook recently and leave what was the longest comment we’ve ever had to a post. It wasn’t just the longest, it was the most detailed and informational I’ve ever read on Facebook. This was in response to our recent episode sometime last month about 3D printed surface textures. Her name is Jen Davis-Wilson, who we actually realized we have a lot in common with once we talked to her. She used to work for IDEO, and has some great experience and insights to

en-us

59:41

CAD Design Help

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/04/13

We have an interview today with Scott Tarcy of CAD Design Help. I love that we’re going to bring in somebody else who has a different CAD design view. Somebody else really who is trying to do something similar that we are in helping to be a resource for people interested in 3D printing in one way or another. His focus is a little more in the CAD side of things. It’s a bit of a cross section. He’s more of an engineer, actually is a degreed engineer, a mechanical engineer. He has worked inside a

en-us

33:30

Teach Yourself CAD

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/04/06

We’ve been having a lot of CAD software and slicing software reviews in recent months. We’re going to continue to do that because there’s so many of them out there. Today’s episode is a little different. We actually have an interview with a new startup company who’s created a new CAD software called SelfCAD. This is a product that’s been in beta for a little while. By the time this is published, it is fully released. We’re going to talk with the CEO and creator, Aaron Breuer, who had decided to

en-us

25:46

Review of the MakerBot Replicator+

WTFFF?! 3D Printing Podcast Volume Three: 3D Print... ·

2017/04/04

In October MakerBot launched their first new 3D printer in years, since the 5thGeneration 3D printer was released back in 2013. Ever since the Smart Extruder+ was released in February 2016, there has been hope thatMakerBot, with the backing and resources of Stratasys, is on a path to deliver best in class products, and continue to be a leader in desktop 3D printing. Here at WTFFF!? and 3D Start Point, we were given the opportunity to work with MakerBot’s latest 3D Printer, the Replicator+, as soon

en-us

140 results

Similar Podcasts

Expres Ráno

Expres FM

PBS News Hour - Full Show

PBS News

CD Voice

China Daily

Israel Today: Ongoing War Report

Noa Levi

Jeffrey Epstein: The Coverup Chronicles

Bobby Capucci