x

75% of people globally want unbiased news (Pew Research) but are concerned they're not getting that.

Get balanced coverage with Symby. See how stories are covered across diverse outlets and spot when one side covers a story the other skips.

PODCAST

Tuned In

High Performance Academy

High Performance Academy Presents: Tuned In. A podcast interviewing influential people from around the world at the top of their respected fields. Covering topics such as Tuning, CAD, Performance Engine Building, Automotive/Motorsport Wiring, Data Analysis, Driver Coaching/Training, Motorsport Fabrication and Car Setup.

leisure automotive

All Episodes

16:56

Field Report: 2100HP 75PSI Supra | X275 Drag Radial...

Tuned In ·

2024/08/06

What's the point of drag racing if you're limiting performance via rules and regulations?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inVarun Sharma gives us a rundown on the 3.3L 2100HP at 75PSI Oceania College/101 Motorsport X275 Drag Radial JZA80 Supra which runs a methanol fed Bullet Race Engineering Billet block-based 2jz engine with a best ET of 6.79s at 212mph making it the fastest Sport Compact in Australia at the time of filming at Sydney Jambor...

en-nz

130:07

120: Wastegates and Boost Control — What You NEED to...

Tuned In ·

2024/08/01

Do I need electronic wastegate control? What about CO2? And how do I know what size wastegate is needed for my build? These questions and a whole lot more are answered thanks to this week’s guest, Matt Wright from Turbosmart. Use “MATT25” to get $25 OFF HPA’s Boost Control course: https://hpcdmy.co/boostbMatt has a unique understanding of the industry, having worked for two of Australia's biggest aftermarket performance brands — two decades at Haltech and a more recent move to Turbosmart. We ...

en-nz

8:24

Field Report: 60 PSI Is LOW Boost? | 2400HP Drag Car...

Tuned In ·

2024/07/30

What are some of the advantages of having an automatic gearbox in a 2400HP 6-second drag car?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inNate from 99 Racing gives us some insight into the transmission setup in their 6.29s at 225mph 2400HP Toyota Camry drag car and how it allows for more consistent passes without some of the disadvantages of the past.The Sydney Jamboree event was sadly rained off but we're keen to see what the team can do with their ne...

en-nz

14:49

Field Report: Sim Racing In Professional Motorsport.

Tuned In ·

2024/07/23

Racing simulators are becoming more popular in the home and, if you're lucky, office, but are they good enough on a professional level without an endless budget?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inJota Sport WEC LMP2 Race Engineer Tomoki Takahashi runs us through some of the advantages a simulator setup offers, the limitations and why a motion platform can be more hindrance than help without a blank chequebook.Discussed is a direct comparison ...

en-nz

133:47

119: 4WD, GT-R-Powered, 1000+WHP Evo. Why... And How?

Tuned In ·

2024/07/18

What does it take to build, tune, and drive a monster Mitsubishi Evolution VIII with a 4.1-litre VR38DETT putting down 1065 hp to all four treads — on pump gas, no less? On this episode of Tuned In, we talk to the Armchair Tuner to find out.Use “EVO100” to get $100 off HPA’s Tuning Starter Package: https://hpcdmy.co/tuningpackagebConrad Bradley has been building fast cars and bikes for a long time, although he currently works outside of the automotive industry in the nuclear field. Conrad cou...

en-nz

14:02

Field Report: 6-Second Rotary — Building a Reliable...

Tuned In ·

2024/07/16

Using the Blueprint Racing 6.53 @ 213mph Mazda 6 for some examples we dive a little into how to build a rotary engine for drag racing.Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inGetting 1500HP out of a rotary engine isn't hard these days with the knowledge in the industry, but doing it with a window of safety and repeat reliability is still a struggle as Jon of Jon Blanch Racing explains. Naturally, some comparisons are made between the rotary and pis...

en-nz

15:00

Field Report: 4 Rotor Build Out, 7.4L N/A V8 In.

Tuned In ·

2024/07/09

Quad Rotor vs V8, Procharger vs Natural Aspiration and more.Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inIt's hard to nail form and function, but Carl Thompson has it down to a fine art when it comes to drift builds between his old 1300HP 26B 4-rotor Aristo/GS300 build and this high compression 'small block' @Mast Motorsports 454ci (7.4L) LSX based V8 Nissan S15 Silva one that is another work of art. Even if you are a solid rotary fan it's hard not to ...

en-nz

129:18

118: Spend Less Time & Money On Your Build.

Tuned In ·

2024/07/04

If you’re planning a big race or street car build, it’s worth thinking about how you can harness the power of 3D scanning, CAD, and additive manufacturing on the big jobs. In this episode, BBi Autosport’s Dimitri Orlov explains how you can incorporate these tools into your build process, how he utilised them when building the infamous “Hoonipigasus” Porsche 911, and a whole lot more.Use “BBI50” to get $50 OFF your 3D Modelling & CAD for Motorsport course: https://hpcdmy.co/CADbBBi Autospo...

en-nz

12:16

Field Report: What IS this thing!?!

Tuned In ·

2024/07/02

Why does this 800hp car look like it belongs to racing classic DTM cars, and what's up with the 6 cylinders?Aleck Kazakovski of GotItRex explains some of the tech talk story of how this GC8/Type R STi has grown into the monster it is today, with multiple time attack wins in Australia and a unique but well-proven setup.The turbocharged EG33 is capable of 9,500rpm and 750kw (1000hp) at 40 PSI, but the team dials things back in the interests of reliability and wallet health to a 'modest' 600kw (...

en-nz

13:28

Field Report: Overlooked Essentials or Overkill...

Tuned In ·

2024/06/25

When building a performance engine, everyone talks endlessly about forged pistons, H vs. I beam connecting rods, high-flow injectors, and '1000hp capable' turbochargers ready to produce 60-100 PSI of boost. That's all exciting and, depending on your goals, critical, but what about your fittings and hoses that none of these components would last without?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inJamie from Raceworks runs us through some of the popular...

en-nz

129:08

117: Got an LS? Here’s How to Get the Most Out of...

Tuned In ·

2024/06/20

What you need to know about tuning General Motors’ LS engines thanks to Matt Sanford of Tuning-Tips.com.Use “MATT100” to get $100 OFF HPA’s Tuning Starter Package: https://hpcdmy.co/starterbMatt Sanford is a self-taught tuner that you might recognise from his YouTube channel of the same name, or his frequent appearances on mega channels like Cleetus McFarland.Matt has been tuning all types of gasoline and diesel vehicles since his teenage years, but his main speciality and passion is GM...

en-nz

17:51

Field Report: How Far is Too Far...? | 1300HP Engine...

Tuned In ·

2024/06/18

How do you know if it is safe to turn your 1300HP R35 GT-R Skyline engine tune right up to 11 and hit the track?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inWhat checks do you need to do before you know it is safe to turn up the boost or even just use what you know is safe on a different type of fuel? What sort of process do professional tuners follow when troubleshooting issues during a race weekend? This interview dives into these topics and much mor...

en-nz

16:26

Field Report: What do 2-stoke Detroit diesels and...

Tuned In ·

2024/06/11

Let's be honest, power is easy to make these days. Anyone with a modest budget can build a 1000hp dyno queen, but what about high-output engines that are expected to last for more than just a few full-power dyno pulls?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inMixing a unique roots style blower (aka supercharger) with 8-into-1 headers for wow factor, Mitch Pullen of Pullen Spec Engines hasn't glossed over the essential parts to ensure this LS-based b...

en-nz

107:38

116: Building an Offroad Viper — Dumb, Awesome, or Both?

Tuned In ·

2024/06/06

If you like doing things yourself, building weird cars, and making the most of what you’ve got, this episode with Matt Brown — AKA Superfast Matt — is a must-listen.Use “FAST50” to get $50 OFF our 3D Modelling & CAD for Motorsport Course: https://hpcdmy.co/CADbAfter walking out of college with an engineering degree, Matt Brown started his career developing engines for NASCAR teams, engineering various parts for Tesla in its early days, and working on secret projects for Apple. Then came 2...

en-nz

12:13

Field Report: How The Xtreme GTR Was Built To Smash...

Tuned In ·

2024/06/04

If you know anything about time attack, chances are you have seen or heard the incredible R32 'Xtreme' GTR, but do you know the story behind it? Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inThis RB power AWD R32 GTR Skyline reset the record in the GCG Open Class at the World Time Attack Challenge event under Tim Slade's capable jandals with a blistering 1:25.92. Recent upgrades to the car helped make this happen, including some aero changes courte...

en-nz

13:07

Field Report: Is This 'Future You'?

Tuned In ·

2024/05/28

14 minutes of race car build tips & experiences.Money. No matter how much we have, no one likes to or wants to waste it. A motorsport application will cost precisely the amount you budget for it, plus some more. In this interview, some tips are discussed on how to trade a bit of your time to make better decisions for your build and your wallet, even if you don't intend to do all the physical work yourself.Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-...

en-nz

110:34

115: Print Final Parts, Not Just Prototypes!

Tuned In ·

2024/05/23

Is 3D printing going to replace CNC machining in the near future?Even your Mum has probably heard of 3D printing at this point, but what’s not so well understood — even by enthusiasts — is just how quickly this technology is advancing, and what's now possible when it comes to making your car faster, stronger, and more capable. One person helping to push that technological envelope is this week’s guest, Joe Dopkowski of 3D Systems.Use “3D50” to get $50 OFF our 3D Modelling & CAD for Motors...

en-nz

12:38

Field Report: Why Do Pro Racers Remove Brake Boosters?

Tuned In ·

2024/05/21

Brake boosters—why don't you find them on race cars? Are motorsport ABS systems harder to use than your OWM setup?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inAshley Field of 909 Motorsport answers these questions and more in relation to aftermarket ABS systems like those offered by Bosch Motorsport along with how easy they are to install, if OEM components can be used and most importantly how ABS can only regulate the braking power you give it meaning...

en-nz

9:04

Field Report: Are Genuine Wheels Worth It?

Tuned In ·

2024/05/14

If replica wheels are just as good as the genuine articles like many claim, why don't we see them used in top-tier motorsport?Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-inKosumi Wakana from Rays Japan answers this question and more on rim stiffness/compliance, how to identify a replica wheel and where to find help if you can't, along with some of the manufacturing options available to wheel manufacturers like Rays.

en-nz

128:38

114: Project Binky — Stuffing a GT-Four Driveline...

Tuned In ·

2024/05/09

If you’ve spent any time on YouTube, you’re probably already aware of this episode’s guest and the various projects his channel is involved in — most famously “Project Binky”, a classic Mini running a Toyota Celica GT-Four engine and AWD driveline.Richard Brunning from Bad Obsession Motorsport joins us to down a few cups of tea, talk motorsport, and run through the ins and outs of neverending project cars, the business of operating a popular automotive YouTube channel, and much more.Use “BAD1...

en-nz

348 results

Similar Podcasts

Expres Ráno

Expres FM

詭哭郎嚎

郎祖筠 & FMTaiwan製作團隊

Ron en Erik Podcast

Ron en Erik

Poor Man"s Pinball Podcast

Poor Men Ian and Drew

WeAreChange on Odysee

WeAreChange